CloverTale Graphics Card GPU Brace Support, Video Card Sag Holder Bracket, Anodized Aerospace Aluminum Upgraded Version Black


Fstop Labs Upgraded Version Black - Bead blasted anodized aircraft 6061 grade CNC milled aluminum, comes in 3 colors, Black, Red, Blue. Low profile for single or dual setups. Full kit includes set of 3 screws and brace. Designed for a wide range of graphics cards and boards. Graphics video card gpu brace bracket kit. Lifetime warranty. Lifetime warranty.

Prevents sagging and stress on motherboard, adjustable for different video card weights and sizes. Full kit includes set of 3 screws and brace. Graphics card GPU brace bracket kit. Low profile for single or dual setups. Support your cards from sagging and weighing on the motherboard. Bead blasted anodized aircraft 6061 grade CNC milled aluminum, comes in 3 colors, Black, Red, Blue.

CloverTale Graphics Card GPU Brace Support, Video Card Sag Holder Bracket, Anodized Aerospace Aluminum Upgraded Version Black - Prevents sagging and stress on motherboard, adjustable for different video card weights and sizes. Designed for a wide range of graphics cards and boards. Support your cards from sagging and weighing on the motherboard.

More information about Fstop Labs Upgraded Version Black

upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum, Single or Dual Slot Cards Black G205


upHere - By using all-aluminum metal material rather than plastic material, VC-1 graphics card support stand can avoid the fragile and ageing problem of plastic material, it can be used for a long time even other hardware have been upgraded. 2. Segmented design. It is a small graphics card support stand with three complex production process,.

A. Tool-less screws are used for fixing the support module. B. The support module is equipped with cushioning scratch-proof pad. C. The base adopts high glossy process. High-end graphics card is very expensive, so the tail end of the graphics card is in a sunken status, it is very likely to be damaged in a long time, the length is quite long, it can provide effective supporting for the tail end of the graphics card, Therefore Jonsbo team develops this graphics card support stand for high-end graphics card users, but most of the cases do not provide additional graphics card supporting protection, so the high-end graphics card will be in a parallel status and the failure rate can be reduced.

upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum, Single or Dual Slot Cards Black G205 - With hidden magnet designon bottom, it not only lets user install it easily but also stand firmly inside the case. 4. Showing the details of the workmanship. 5.

More information about upHere


Similar products



24 Pieces Set = 24-pin x 4,8Pn x 12,6-pin x 8 Cable Comb for 3 mm Cable Gesleeved Up to 3.4 mm/0.13inch Black,CM245


uphere - Package contents: 24-pin *4, 8-pin *12, 6-pin * 8. Features designed for sleeve cables durable abs plastic rounded edges protect Sleeving Black Color Package Contents 2 x 24 pin Cable Combs -Black 4 x 8 pin Cable Combs -Black 2 x 6 pin Cable Combs -Black Compatibility Fits 3. 4mm silver plated cables or bare wire 1.

All-aluminum metal material - providing strong and long lasting support. Designed specifically for use with 3. 4mm silver plated cables or bare wire, these combs help keep your cables from twisting for a cleaner, more organized look. Keep your cables in a good management. 5. With hidden magnet designon bottom, it not only lets user install it easily but also stand firmly inside the case.

24 Pieces Set = 24-pin x 4,8Pn x 12,6-pin x 8 Cable Comb for 3 mm Cable Gesleeved Up to 3.4 mm/0.13inch Black,CM245 - 4. Showing the details of the workmanship. Fits 3. 4mm silver plated cables or bare wire. Bring your build to a new level of perfection with upHere Cable Combs. 3 different type comb: gpu 6pin3+3x8, gpu 8Pin4+4x12, motherboard 24pin12+12x4;. A.

More information about uphere


Similar products



Thermal Grizzly Kryonaut Thermal Grease Paste - 1.0 Gram


Thermal Grizzly TG-K-001-RS - Fits 3. 4mm silver plated cables or bare wire. With hidden magnet designon bottom, it not only lets user install it easily but also stand firmly inside the case. 4. Showing the details of the workmanship. Package contents: 24-pin *4, 8-pin *12, 6-pin * 8. 3 different type comb: gpu 6pin3+3x8, gpu 8Pin4+4x12, motherboard 24pin12+12x4;.

By using all-aluminum metal material rather than plastic material, VC-1 graphics card support stand can avoid the fragile and ageing problem of plastic material, it can be used for a long time even other hardware have been upgraded. 2. Segmented design. Tg-k-001-rs. Keep your cables in a good management. Tg-k-001-rs 1.

Thermal Grizzly Kryonaut Thermal Grease Paste - 1.0 Gram - All-aluminum metal material - providing strong and long lasting support. Segmented design, itx and long pSU bracket cases, compatible with traditional MATX, it can fulfill users' various needs.3. Design with hidden magnet on bottom. It is a small graphics card support stand with three complex production process,.

More information about Thermal Grizzly TG-K-001-RS


Similar products



Corsair LL Series LL120 RGB 120mm Dual Light Loop RGB LED PWM Fan 3 Fan Pack with Lighting Node Pro


Corsair CO-9050072-WW - 3 different type comb: gpu 6pin3+3x8, gpu 8Pin4+4x12, motherboard 24pin12+12x4;. Segmented design, itx and long pSU bracket cases, compatible with traditional MATX, it can fulfill users' various needs.3. Design with hidden magnet on bottom. 1. All-aluminum metal material - providing strong and long lasting support.

Software control and customize rgb lighting effects with the included Corsair lighting Node Pro or expand your RGB lighting with more Corsair RGB fans or RGB LED lighting strips sold separately. Bearing Type:Hydraulic. 5. Pair with the included Corsair lighting Node Pro to customize lighting with a wide array of vivid effects and patterns.

Corsair LL Series LL120 RGB 120mm Dual Light Loop RGB LED PWM Fan 3 Fan Pack with Lighting Node Pro - Package contents: 24-pin *4, 8-pin *12, 6-pin * 8. Made for those seeking excellent airflow, and powerful lighting, quiet operation, the Corsair ll120 RGB fan puts your PC back in the loop. Using an optimized 120mm fan blade and pwm control, set the speed of the fan anywhere from 600 RPM to 1, 500 RPM for precise noise and airflow adjustment.

With hidden magnet designon bottom, it not only lets user install it easily but also stand firmly inside the case. 4. Showing the details of the workmanship.

More information about Corsair CO-9050072-WW


Similar products



4 Grams - ARCTIC MX-4 - Thermal Compound Paste For Coolers | Heat Sink Paste | Composed of Carbon Micro-particles | Easy to Apply | High Durability


ARCTIC MX-4 - The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video. Safe application:it does not contain any metallic particles so electical conductivity would not be an issue. Bearing Type:Hydraulic. Software control and customize rgb lighting effects with the included Corsair lighting Node Pro or expand your RGB lighting with more Corsair RGB fans or RGB LED lighting strips sold separately.

3 different type comb: gpu 6pin3+3x8, gpu 8Pin4+4x12, motherboard 24pin12+12x4;. By using all-aluminum metal material rather than plastic material, VC-1 graphics card support stand can avoid the fragile and ageing problem of plastic material, it can be used for a long time even other hardware have been upgraded.

4 Grams - ARCTIC MX-4 - Thermal Compound Paste For Coolers | Heat Sink Paste | Composed of Carbon Micro-particles | Easy to Apply | High Durability - 2. Segmented design. 120mm fan blade engineered for Low-Noise operation without sacrificing performance. Thermal compound for all coolersEasy to ApplyWith an ideal consistency, the MX-4 is very easy to use, even for beginners. Fits 3. 4mm silver plated cables or bare wire. Thermal Conductivity 8. 5 w/mk viscosity 870 poise Density 2.

More information about ARCTIC MX-4


Similar products



Noctua NA-SYC1, 4 Pin Y-Cables for PC Fans Black


Noctua NA-SYC1 - 120mm fan blade engineered for Low-Noise operation without sacrificing performance. With hidden magnet designon bottom, it not only lets user install it easily but also stand firmly inside the case. 4. Showing the details of the workmanship. Attention! common mainboard fan headers support up to 9. 6 or 12w check your mainboard manual for detailed information.

Keep your cables in a good management. Two 4-pin pwm fans can be controlled simultaneously via one PWM fan header; RPM speed signal of one fan is transmitted to the motherboard for monitoring. It guarantees that heat generated from the CPU or GPU is dissipated efficiently. In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time.

Noctua NA-SYC1, 4 Pin Y-Cables for PC Fans Black - With an ideal consistency, the MX-4 is very easy to use, even for beginners. Formula, the mx-4 guarantees exceptional heat dissipation from the components and supports the stability needed to push your system to its limit. Composed of carbon micro-particles which lead to an extremely high thermal conductivity.

Y-type splitter cables for running two fans on one fan header. 16 independent rgb leDs in every fan, split between two separate light loops. Set includes 2 cables; Trusted Noctua quality backed up with 6-year manufacturer-warranty.

More information about Noctua NA-SYC1


Similar products



EVGA GeForce RTX 2070 XC Ultra Gaming, 8GB GDDR6, Dual HDB Fans & RGB LED Graphics Card 08G-P4-2173-KR


EVGA RTX 2070 XC ULTRA - With the evga geforce rtx 20-series gaming cards you get the best gaming experience with next generation graphics performance, ice cold cooling, and advanced overclocking features with the all new EVGA Precision X1software. Fits 3. 4mm silver plated cables or bare wire. 75 slot cooler offer higher performance cooling and much quieter acoustic noise.

3 year & evga 24/7 technical support. The evga geforce rtx 20-series graphics cards are powered by the all-new NVIDIA Turing architecture to give you incredible new levels of gaming realism, speed, power efficiency, and immersion. Powered by the new nvidia turing gpu architecture and the revolutionary NVIDIA RTX platform, the new graphics cards bring together real-time ray tracing, artificial intelligence, and programmable shading.

EVGA GeForce RTX 2070 XC Ultra Gaming, 8GB GDDR6, Dual HDB Fans & RGB LED Graphics Card 08G-P4-2173-KR - 1. All-aluminum metal material - providing strong and long lasting support. Two 4-pin pwm fans can be controlled simultaneously via one PWM fan header; RPM speed signal of one fan is transmitted to the motherboard for monitoring. This is not only a whole new way to experience games - this is the ultimate PC gaming experience.

Software control and customize rgb lighting effects with the included Corsair lighting Node Pro or expand your RGB lighting with more Corsair RGB fans or RGB LED lighting strips sold separately. Adjustable rgb led offers configuration options for all your PC lighting needs. Segmented design, compatible with traditional MATX, iTX and long PSU bracket cases, it can fulfill users' various needs.

More information about EVGA RTX 2070 XC ULTRA


Similar products



Intel Core i9-9900K Desktop Processor 8 Cores up to 5.0 GHz Turbo Unlocked LGA1151 300 Series 95W


Intel BX80684I99900K - Get grip game + evga vehicle skin w/ Purchase, redeemed at EVGA while supplies last. 120mm fan blade engineered for Low-Noise operation without sacrificing performance. Fits 3. 4mm silver plated cables or bare wire. Software control and customize rgb lighting effects with the included Corsair lighting Node Pro or expand your RGB lighting with more Corsair RGB fans or RGB LED lighting strips sold separately.

Pwm fan control allows for dynamic speed adjustment between 600 rpm to 1, 500 rpm, minimizing noise or maximizing airflow. Adjustable rgb led offers configuration options for all your PC lighting needs. Black connectors and black cable sleeving for clean optics. It is a small graphics card support stand with three complex production process,.

Intel Core i9-9900K Desktop Processor 8 Cores up to 5.0 GHz Turbo Unlocked LGA1151 300 Series 95W - By using all-aluminum metal material rather than plastic material, VC-1 graphics card support stand can avoid the fragile and ageing problem of plastic material, it can be used for a long time even other hardware have been upgraded. 2. Segmented design. Intel optane Memory Supported. It guarantees that heat generated from the CPU or GPU is dissipated efficiently.

In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time.

More information about Intel BX80684I99900K


Similar products



2018 EDITION CloverTale Cable Comb 24 Pieces Set = 24-pin x 4, 8-pin x 12, 6-pin x 8 for 3 mm Cable Gesleeved Black, with Reusable Fastening Cable Ties 10 Pack Black


Fstop Labs Cable Comb black - A. Tool-less screws are used for fixing the support module. B. The support module is equipped with cushioning scratch-proof pad. C. The base adopts high glossy process. High quality PC cable comb. Adjustable rgb led offers configuration options for all your PC lighting needs. Bearing Type:Hydraulic. Package contents: 24-pin *4, 8-pin *12, 6-pin * 8.

. 3 year & evga 24/7 technical support. Segmented design, itx and long pSU bracket cases, compatible with traditional MATX, it can fulfill users' various needs.3. Design with hidden magnet on bottom. Compatible only with Motherboards based on Intel 300 Series Chipsets. Intel optane Memory Supported. 75 slot cooler offer higher performance cooling and much quieter acoustic noise.

2018 EDITION CloverTale Cable Comb 24 Pieces Set = 24-pin x 4, 8-pin x 12, 6-pin x 8 for 3 mm Cable Gesleeved Black, with Reusable Fastening Cable Ties 10 Pack Black - With hidden magnet designon bottom, it not only lets user install it easily but also stand firmly inside the case. 4. Showing the details of the workmanship. Dual hdb fans and all-new 2. Real boost clock: 1725 mhz; memory detail: 8192mb gddr6.

More information about Fstop Labs Cable Comb black


Similar products



Noctua NF-F12 PWM chromax.Black.swap, Premium Quiet Fan, 4-Pin 120mm, Black


Noctua 24314 - 3 different type comb: gpu 6pin3+3x8, gpu 8Pin4+4x12, motherboard 24pin12+12x4;. 4-pin connector supports both 3-pin and 4-pin fans. For further customisation, a wide range of accessories such as coloured cables, additional anti-vibration pads and anti-vibration mounts are available separately. 16 independent rgb leDs in every fan, split between two separate light loops.

Two 4-pin pwm fans can be controlled simultaneously via one PWM fan header; RPM speed signal of one fan is transmitted to the motherboard for monitoring. Pwm fan control allows for dynamic speed adjustment between 600 rpm to 1, 500 rpm, minimizing noise or maximizing airflow. High quality abs cable combs / cable organizer for computer PC cable management.

Noctua NF-F12 PWM chromax.Black.swap, Premium Quiet Fan, 4-Pin 120mm, Black - Comes with: gpu 6pin3+3 x 8, gpu 8pin4+4 x 12, motherboard 24 pin12+12 x 4; Cable Ties x 10 Pc cable combs ensure cable separation and increased airflow while maintaining an organized look inside your PC. Keep your cables in a good management. These cable comb are BLACK and can be easily concealed. Premium quiet fan, 4-pin pwm, 12v, max.

Package contents: 24-pin *4, 8-pin *12, 6-pin * 8. 3 year & evga 24/7 technical support.

More information about Noctua 24314


Similar products