Top 10 Arduino Mega Case – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. SunFounder

#ad

Genuino Mega 2560 Rev3 , SunFounder 2560 Case Enclosure Transparent Gloss Acrylic Computer Box Compatible with Arduino Mega 2560 Rev3 R3

#adSunFounder #ad - Unique design for 2560 controller board with pin leakage, which provides easy connection to other components. Fastened by eight screws, very easy to install and secure. Provides excellent protection and fashionable appearance. The 2560 controller board case is maded by premium acrylic. The protective case of 2560 controller board compatible with Arduino. Note: the protective film of the case may show a little black, tearing the protective film it will look clean and not affect the use.

Brand	SunFounder #ad
Manufacturer	SunFounder #ad
Height	0.08 Inches
Length	4.41 Inches
Width	2.36 Inches
Part Number	Mega 2560
Model	Mega 2560 case

2. sb components

#ad

Sb components Arduino Mega Case Enclosure New Clear Transparent Computer Box with Switch

#adsb components #ad - Box for arduino, Clear case for Arduino,. Protective Case for Arduino Case. Arduino Case. Brand new case for Arduino Mega 2560 .

Brand	sb components #ad
Manufacturer	SainStore Inc. #ad
Height	0.6 Inches
Length	4.3 Inches
Weight	0.09 Pounds
Width	2.16 Inches
Part Number	101-30-207
Model	101-30-207

3. HiLetgo

#ad

HiLetgo 5pcs Mega 2560 Enclosure Case Kits Transparent Acrylic Enclosure Case Mega 2560 Case Enclosure Box for Arduino Mega 2560 R3 Pack of 5

#adHiLetgo #ad - Unique design for mega 2560 with pin leakage, which provides easy connection to other components. Provides excellent protection, and fashionable appearance. Transparent acrylic protective case for Arduino Mega 2560 Come with English installation instructions. Easy to install and secure for your Arduino Mega 2560 .

Brand	HiLetgo #ad
Manufacturer	HiLetgo #ad
Part Number	3-01-1551

4. Karlsson Robotics

#ad

Karlsson Robotics Arduino Project Enclosure

#adKarlsson Robotics #ad - Allows you to easily enclose your Arduino main board, Arduino Mega, or some of the other board that fits the Arduino foot print. Has a snap-in compartment in the back for accessing switches or connections or battery access. Has room internally for an Arduino and a shield.

Brand	Karlsson Robotics #ad
Manufacturer	Karlsson Robotics #ad
Weight	0.14 Pounds
Part Number	PRT-10088
Model	8541585391

5. DollaTek

#ad

DollaTek Transparent Acrylic Case Shell Enclosure Gloss Box for Arduino MEGA 2560 R3

#adDollaTek #ad - Precisely machined from high quality Acrylic. Size: 12x7x2cm. Note: only case and case components are included in sale, sale does not include Mega2560 R3. Transparent protective box case for Mega2560 R3. To protect your favourite little computer against damages, dust and scratches.

Brand	DollaTek #ad
Manufacturer	DollaTek #ad

6. sb components

#ad

Sb components Premium Black Mega Case Enclosure, Protective Case Cover for Mega

#adsb components #ad - Holds the Mega firmly in place. The case is a two-piece injection-moulded ABS enclosure that snaps together around. Secondary screw-mounting points for securing it. Includes reset key for use with the Mega's reset button. Provide access to all Mega R3 connectors. It provides tough protection for the mega while providing access to all mega connectors. This is a protective case specifically designed for the Mega 2560 R3. It also includes an integrated power switch for the mega.

Brand	sb components #ad
Manufacturer	SainStore Inc. #ad
Height	0.6 Inches
Length	4.3 Inches
Weight	0.09 Pounds
Width	2.16 Inches
Part Number	101-30-205
Model	101-30-205

7. ELEGOO

#ad

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

#adELEGOO #ad - The second one is a not connected pin, that is reserved for future purposes. The chip is atmega+2560-16au and 16u2, same with the official version. 5 * 2. Use 5. 0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the RESET pin, shields will be compatible both with the board that use the AVR, the IOREF that allow the shields to adapt to the voltage provided from the board.

1mm dc barrel jack compatible with 5. Stronger reset circuit. The mega is 100% compatible with arduino IDE and most shields designed for the Arduino mega R3，RoHS Compliant.

5 * 2. In future, which operate with 5V and with the Due that operate with 3. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Improved and expert version: 1. 5mm dc barrel jack. 3v.

Brand	ELEGOO #ad
Manufacturer	ELEGOO #ad
Height	1 Inches
Length	2 Inches
Weight	0.14 Pounds
Width	4 Inches
Part Number	EL-CB-003
Model	EL-CB-003
Warranty	6 MONHTS

8. GeeekPi

#ad

GeeekPi Raspberry Pi 4B Holder ABS Holder Breadboard Holder, 5 in 1 Base Plate Case for Raspberry Pi 4 Model B,3B+,3B,2B,B+,Zero,Zero W2 and Arduino UNO,Arduino Mega 2560 Blue Holder

#adGeeekPi #ad - Compatible with rpi 4b/3b+/3b/2b/b+/zero/Zero W/Zero 2/Zero W 2. The tf card slot can be easy accessed and the same as power port, HDMI port. It is portable, carry, easy to move, this ABS holder can be fixed on the table stably for your needs. Package includes:1 x abs experiment holder platform, 1 x Screw pack for the holderM2. 0*6, 2 x acrylic washers, 4 x Anti-slipper robber pads, 1 x Screw Driver. Suitable for arduino uno, mega2560 development breadboards, for Education kit or DIY project.

Brand	GeeekPi #ad
Manufacturer	GeeekPi #ad
Part Number	Holder

9. SunFounder

#ad

Raspberry Pi 4B 3B+ 3B 2 Model B 1 Model B and 400 800 Points Breadboard, SunFounder RAB Holder Raspberry Pi Breadboard Holder 5 in 1 Base Plate with Rubber Feet Compatible with Arduino R3 Mega 2560

#adSunFounder #ad - Well-crafted design- the rab holder has a customized, sleek design that is attractive and is more comfortable to touch while working with it. Wide-range compatiblity- this base plate case is compatible with arduino r3, mega2560 and Raspberry Pi 4B/3/2/B+, Pi zero as well as working with both 400 and 830 points breadboards.

Dynamic portability- support rubber feets, able to be easily carried, made of long-lasting polyethylene plastic, features small size, sturdy and lightweight, and fixed on a flat table for making projects and creating experiments. Cleaner and organized:this breadboard holder is great for keeping your projects in order. Superiorly designed slots- the slots are specially designed for TF cards, HDMI and USB cords to be inserted without hindering the power connection. Just pick up and move the whole holder, a good way to make a portable work platform.

Brand	SunFounder #ad
Manufacturer	SunFounder #ad
Part Number	RAB Holder
Model	RAB Holder

10. Arduino

#ad

Arduino Mega 2560 REV3 A000067

#adArduino #ad - Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users. Ideal for: 3d printing, CNC robotics. Based on the 8-bit avr microcontroller atmega2560, it has 54 digital I/O pins, 16 analog inputs and a larger space for your sketches. Compatible with most shields designed for the Arduino Uno. Arduino mega 2560 is designed for your most ambitious projects which require additional pins and extra memory.

Brand	Arduino #ad
Manufacturer	Arduino #ad
Height	0.98 Inches
Length	4.61 Inches
Weight	0.08 Pounds
Width	2.36 Inches
Part Number	2560 R3
Model	2560 R3