As an Amazon Associate I earn from qualifying purchases.
ViaGasaFamido #ad - Integrated functions 21 function keys: including emergency stop, F value decrease, spindle speed increase, stop, spindle open and close, F value increase, workpiece origin, redo, manual speed increase, run, manual speed decrease, spindle speed decrease, single Step operation, these functions are all one-key operations.
The exterior housing is water-resistant and can guarantee normal operation against dirty or oil. Integrated 21 function keys including emergency stop, cycle start, spindle on/off and so on.
12*12mm buttons ensure that your finger will not interfere with the adjacent buttons. The appearance adopts a waterproof design, which can ensure that the dirt and oil foam under the factory will not affect the operation: very durable. Easy to use, no need to install any software or drive, connected by USB port and the cable can be stretched to about 3 meters. This cnc engraving machine controller is specially designed for Mach3 system.
kiwifox #ad - 12-36v dc. Arduino cnc Shield V3. 4-axis support. Stepper motors can be connected with 4 pin molex connectors or soldered in place.
kuman #ad - 2 x end stops for each axis 6 in total. Runs on 12-36V DC. 4pcs a4988 stepper Motor Driver with radiator. Pwm spindle and direction pins. Mcu: atmega328, usb interface: ATmega16U2. Latest cnc shield Version 3. 0 board. 4-axis support.
ELEGOO #ad - This is the upgraded starter kits with power supply module, 9V battery with dc. High quality kit with uno r3. Lcd1602 module with pin header not need to be soldered by yourself.
Walfront #ad - It is a flexible set, compatible with and most shields designed for the micro-drive laser engraving machine, with 3 axis stepper motor driver, three-axis CNC engraving machine.
Easy to operate: 2a can be controlled within the two-phase four-wire stepper motor, simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Power dc5v interface and 7.
ELEGOO #ad - Lcd1602 module and gy-521 sensor module with pin header no need to solder by yourself. Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, diodes, IC, buttons, etc.
Miayon #ad - Buy it now:the jumper caps are individually bagged, if you have any question, you will not worry they would scratter during the shippment. Wide application: the jumper caps are suitable for PCB PC DVD HDD Motherboard Shorting.
ACEIRMC #ad - Pwm spindle and direction pin: pwm spindle and direction pin, A - you can copy X, Y, 4 shaft support X, Z, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4. Package contents: 1 x cnc shield Board 4 x A4988 Stepper Motor Driver.
DAOKI #ad - Package content:1 x cnc shield v3. 0 board, 1 x dc power cable, 1 x usb cable, 4 x heatsink, 4 x drv8825 stepper motor driver, 1 x Board for Arduino, 10 x Jumper Cap.
Latest cnc shield Version 3. 0 for Arduino. Drv8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution down 1/32-step;Intelligent chopping control automatically selects the correct current decay mode fast decay or slow decay.
sb components #ad - Single motor output current: 600mA or 1A peak per channel. Dual h-bridge ic l293d. 2 ir sensor connectors with 3. 3v level output protection. Control 2 stepper motor. Motor input supply Range: 6V - 24V. On board arrow Indicator for motor direction Indication,.
1. ViaGasaFamido
#adViaGasaFamido Stepper Motor CNC Engraving Machine Manual Controller USB Connector 4-axle Control CNC Breakut Board Controller Kit for Mach3,Sport Control
#adThe exterior housing is water-resistant and can guarantee normal operation against dirty or oil. Integrated 21 function keys including emergency stop, cycle start, spindle on/off and so on.
More information #ad
The appearance size is 222MM long and 80MM wide. The 56mm hand grip is completely designed with the appearance and size of the industrial electronic hand pulse. 12*12mm buttons ensure that your finger will not interfere with the adjacent buttons. The appearance adopts a waterproof design, which can ensure that the dirt and oil foam under the factory will not affect the operation: very durable. Easy to use, no need to install any software or drive, connected by USB port and the cable can be stretched to about 3 meters. This cnc engraving machine controller is specially designed for Mach3 system.
| Brand | ViaGasaFamido #ad |
| Manufacturer | ViaGasaFamido #ad |
| Height | 0.39 Inches |
| Length | 0.39 Inches |
| Weight | 0.58 Pounds |
| Width | 0.39 Inches |
| Part Number | ViaGasaFamidosn4fg1e0wg1431 |
More information #ad
2. kiwifox
#ad4 Axis CNC Control V3 CNC Engraver Shield Expansion Board for Arduino 3D Printer Kit
#adMore information #ad
| Brand | kiwifox #ad |
| Manufacturer | kiwifox #ad |
| Height | 1 Inches |
| Length | 5 Inches |
| Weight | 0.1 Pounds |
| Width | 3 Inches |
| Part Number | 1 |
| Model | 1 |
More information #ad
3. kuman
#adKuman CNC Shield Expansion Board V3.0 +UNO R3 Board + A4988 Stepper Motor Driver with Heatsink for Arduino Kits K75 CNC Shield+UNO R3+Stepper Motor K75-CNC-UK, Red Blue
#adMore information #ad
| Brand | kuman #ad |
| Manufacturer | kuman #ad |
| Height | 2.36 Inches |
| Length | 1.97 Inches |
| Weight | 0.13 Pounds |
| Width | 1.57 Inches |
| Part Number | K75-CNC-UK |
| Model | K75-CNC-UK |
| Warranty | 1 year |
More information #ad
4. ELEGOO
#adELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
#adMore information #ad
100% compatible with arduino uno r3, MEGA 2560 R3, NANO. The most economical kit based on Arduino platform to starting programming for those beginners who are interested. Free pdf tutorialmore than 22 lessons and clear listing in a nice package.| Brand | ELEGOO #ad |
| Manufacturer | ELEGOO #ad |
| Height | 1.97 Inches |
| Length | 8.3 Inches |
| Weight | 1.2 Pounds |
| Width | 5.5 Inches |
| Part Number | EL-KIT-003 |
| Model | EL-KIT-003 |
| Warranty | CHOKING HAZARD -- Small parts. Not for children under 3 yrs. |
More information #ad
5. Walfront
#ad3D Printer Engraving Expansion Board Kit Controller CNC Shield V4+Nano 3.0 Board+A4988 Driver with USB Cable for Arduino
#adEasy to operate: 2a can be controlled within the two-phase four-wire stepper motor, simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Power dc5v interface and 7.
More information #ad
5-12v voltage input, part replacement, compatible with GRBL for easy service, upgrade-ability and expansion. Simple step and direction control interface, taking anti-static measures before you use the A4988 modules in case of short-circuit. Released the digital io interface and the i2c interface, such as ENDSTOP, easy to connect to other modules, LCD I2C or other I2C module.| Brand | Walfront #ad |
| Manufacturer | Walfront #ad |
| Height | 0 Inches |
| Length | 2.83 Inches |
| Weight | 0.11 Pounds |
| Width | 2.32 Inches |
| Part Number | Walfrontksh9tmr2yv |
| Model | 8541612297 |
More information #ad
6. ELEGOO
#adELEGOO Mega R3 Project The Most Complete Ultimate Starter Kit w/ TUTORIAL Compatible with Arduino IDE
#adMore information #ad
Free pdf tutorial in the cd more than 35 lessons. We have always cared about the customer experience and improve the product function details. The mega complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE.| Brand | ELEGOO #ad |
| Manufacturer | ELEGOO #ad |
| Height | 1.85 Inches |
| Length | 13.7 Inches |
| Weight | 2.15 Pounds |
| Width | 8.4 Inches |
| Part Number | EL-KIT-008 |
| Model | EL-KIT-008 |
| Warranty | 6 MONTHS |
More information #ad
7. Miayon
#ad600PCS 2.54mm Short Circuit Cap Jumper Bridge Plug for Arduino Raspberry Pi PCB PC DVD HDD, Miayon Jumper Caps Kit
#adMore information #ad
And we have excellent after-sale service, welcome to contact us!54mm/0 What you wiell get: 600 jumper caps in 6 colors, each color has 100 jumper caps. 10inch. Various color: we have 6 colors to meet your requirs:red, blue and black, white, green and yellow. Space: 2.| Brand | Miayon #ad |
| Manufacturer | Miayon #ad |
| Part Number | chen-shek2638 |
| Model | chen-shek2638 |
More information #ad
8. ACEIRMC
#adACEIRMC 3D Printer CNC Shield V3 Engraver Expansion Board with 4X A4988 Driver Module and 4 x Radiator
#adMore information #ad
5. Cnc shield expansion board v3. 0 + a4988 stepper motor driver with Heatsink for Arduino Kits K75. Main function: the extension board can be used for engraving machine or 3D printer driver. A4988 stepper motor driver board is a breakout board for Allegro's A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection;.| Brand | ACEIRMC #ad |
| Manufacturer | Organizer #ad |
| Part Number | 10536 |
More information #ad
9. DAOKI
#adUSB Cable for Engraving Machine, DAOKI CNC Shield V3.0 Expansion Board Kit with Board for Arduino, 4PCS DRV8825 Stepper Motor Driver and Heatsink, 10PCS Jumper Cap
#adLatest cnc shield Version 3. 0 for Arduino. Drv8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution down 1/32-step;Intelligent chopping control automatically selects the correct current decay mode fast decay or slow decay.
More information #ad
4-axis support x, z, y, y, a-can duplicate x, z or do a full 4th axis with custom firmware using pins D12 and D13. Board for arduino: operating voltage: 5V; Digital I/O Pins: 14 of which 6 provide PWM output.| Brand | DAOKI #ad |
| Manufacturer | DAOKI #ad |
| Weight | 0.22 Pounds |
| Part Number | DR-US-341 |
| Model | DR-US-341 |
More information #ad
10. sb components
#ad2 IR sensors and a Single ultrasonic Sensor., SB New Motorshield for Raspberry Pi 3,2,1 and Zero This Expansion Board can Control up to 4 Motors or 2 Stepper Motor
#adMore information #ad
| Brand | sb components #ad |
| Manufacturer | SB Components #ad |
| Part Number | SKU08001 |
| Model | NA |
More information #ad
