As an Amazon Associate I earn from qualifying purchases.
Noctua #ad - Compact, highly flexible controller for 4-pin PWM fans. No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors. Includes a 3-way splitter cable for controlling up to 3 fans simultaneously.
Thermaltake #ad - Included ties/velcro for easy placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place. Supports 10 4-pin independent fans :capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis.
icepc #ad - Professional high speed regulating circuit, high performance, support for SATA interface. This cooling fan hub is equipped with the independent speed controller.
1 one enjoy #ad - Easy to install: double-sided adhesive for easy installation and more stable standing in the surface. Pwm function: each port has its own pwm function and the fan speed can be adjusted at the same time.
Comidox #ad - Circuit load capacity: 5A for each output and 8A for bus current. It can be turned on with the three-wire fan monitoring function stall warning. Multiple fans can be used in parallel total current does not exceed 5A, support automatic temperature control and air cooling speed control, temperature control speed has four temperature zone settings, widely used.
Supports all internal 12v 5a fans, high efficiency, synchronous rectified output, no need for additional heat sinks even for high current operation.
YELLOW SAND SHELL #ad - Connect the power supply SATA cable to fan hub before you attach/stick it on the chassis. You then need to connect the fan hub’s PWM cable to the motherboard. We have a track record of ensuring happiness of clients and are absolutely confident that our product will exceed your expectations.
Pwm fan controller temperature control the cpu port red port, would be the only port that can be controlled by the operating system. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. Step by step set-up you will receive 1 hub & 1 pwm connector in your package.
It has eva double-sided adhesive tape at the back of the hub to mount to the case or any flat place. The pwm interface is connected to cpu fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan. We will go an extra mile to redress the situation at hand. Money back product warranty our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information.
SinLoon #ad - Functionpc 8 channels fan hub reduce speed to reduce noise & power consumption when computer parts are free. Knob adjusthigh accuracy and good performance, equipped with an independent speed controller and the speed can be adjusted at will.
Adjustment method: 1 Manual Adjustment Knob. Increase speed to reduce computer part temperature when computer parts are busy. Material knob cooling fan speed Controller adopts plastic and metal materials, reliable, durable, with low loss and low heat.
ELECTOP #ad - So, that designated by the system for that fan. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
If the chassis fan is configured in bios to run at 50%, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. You can connect to the CPU fan lead on the system board or the chassis fan lead. Since the mainboard can only receive one rotation speed signal, but no speed signal. Red is expected to be a pass through for the cpu fan.
KLLsmDesign #ad - Cool luminous shell: the fan thermostat looks like a sports car, length: 118mm, width: 55mm, height: 24mm. Desktop computer p-argb fan temperature control controller:direct sata power Input, support 8 PWM intelligent temperature control 4-pin + 10 5V ARGB interface 3-pin + remote wireless remote control three in one function, enables users to optimally expand cooling capability within the chassis.
Accessories: the package contains rgb fan thermostat x1, temperature control cable x1, SATA power cable x1, motherboard sync cable x1. There are about 365 light modes to choose from. Wireless remote control function: the controller is equipped with a wireless remote control switch, which can freely switch between the hosting mode and the remote control mode.
Kingwin #ad - 4 channel Fan Controller. Dial Control. Temperature Monitor. Fan rpm Display. Wide viewing LCD Display.
1. Noctua
#ad4-Pin PWM Fan Controller Black, Noctua NA-FC1
#adMore information #ad
Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans such as Noctua’s industrialPPC series. 6-year manufacturer’s warranty.| Brand | Noctua #ad |
| Manufacturer | Noctua #ad |
| Height | 0.98 Inches |
| Length | 1.89 Inches |
| Weight | 0.11 Pounds |
| Width | 0.83 Inches |
| Part Number | NA-FC1 |
| Model | NA-FC1 |
| Warranty | 6 year manufacturer’s warranty |
More information #ad
2. Thermaltake
#adThermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1
#adMore information #ad
Blue led power Indicator. Direct sata power input: powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use.| Brand | Thermaltake #ad |
| Manufacturer | Thermaltake USA Direct #ad |
| Height | 0.7 Inches |
| Length | 3.2 Inches |
| Weight | 0.1 Pounds |
| Width | 1.7 Inches |
| Part Number | AC-023-AN1NAN-A1 |
| Model | AC-023-AN1NAN-A1 |
| Warranty | 1 year warranty |
More information #ad
3. icepc
#adIcepc PC 8 Channels Fan Hub 4 Knob Cooling Fan Speed Controller for CPU Case HDD Vga Pwm Fan Pci Bracket Power by 12V Fan Consata Interface
#adMore information #ad
Made of high-quality material, durable, firm and stable. Mini size, suitable for more types of computer chassis. Cooling fan speed controller only, other accessories demo in the picture is not included.| Brand | icepc #ad |
| Manufacturer | icepc #ad |
| Part Number | ICEPC0015-1 |
| Model | ICEPC0015-1 |
More information #ad
4. 1 one enjoy
#ad1 one enjoy Thermalright PWM Fan Hub PC Case Fan Controller 4 Pin, Support 10 Computer CPU Fans Splitter PWM
#adMore information #ad
10-port fan hub: supports 10 pwm 4 pin fans at the same time. Compact design can save space and make the wire more tidy. Stable sata power input: simple and stable. Only the speed of the red port can be identified by the system. Only one saTA connection to the system.| Brand | 1 one enjoy #ad |
| Manufacturer | 1 one enjoy #ad |
| Part Number | FANHUB-PWM |
More information #ad
5. Comidox
#adComidox 2PCS DC 12V 4 Wire PWM PC CPU Fan Temperature Control Speed Controller Module CPU High-Temp Alarm
#adSupports all internal 12v 5a fans, high efficiency, synchronous rectified output, no need for additional heat sinks even for high current operation.
More information #ad
Note: the above range is only applicable to the PWM range, the actual control effect will vary depending on the fan. Output range: 20%-100% for the first channel, or 40%-100% for the first channel tfl = on, 10%-100% for the second channel and the third channel.| Brand | Comidox #ad |
| Manufacturer | Comidox #ad |
| Part Number | 8541608034 |
| Model | 8541608034 |
More information #ad
6. YELLOW SAND SHELL
#adChassis Fan Hub CPU Cooling | 10 Port 12 V SATA to Fan-Header with 4 Pin PWM Controller | Dedicated Supply from PSU to Link Multiple Points
#adPwm fan controller temperature control the cpu port red port, would be the only port that can be controlled by the operating system. Just in case the product falls short of your expectations in any manner, you can return it for a 100% refund. Step by step set-up you will receive 1 hub & 1 pwm connector in your package.
More information #ad
The other 9 black fan ports can NOT be adjusted in speed and will copy the power level of what the red port is at. Connect 1 fan to the red port on fan hub then connect remaining fans. Most efficient sata to fan adapter in 2019 managing multiple fans from a single case input has become easier for you now. It has eva double-sided adhesive tape at the back of the hub to mount to the case or any flat place. The pwm interface is connected to cpu fan interface on motherboard by PWM cable & the red interface is dedicated for CPU fan. We will go an extra mile to redress the situation at hand. Money back product warranty our product is backed up by manufacturer’s warranty so feel free to contact us for any query or information.
| Brand | YELLOW SAND SHELL #ad |
| Manufacturer | YELLOW SAND SHELL #ad |
| Part Number | Excuty |
More information #ad
7. SinLoon
#adSinLoon PC 8 Channels Fan Hub Knob Cooling Fan Speed Controller for CPU Case HDD VGA PWM Fan PCI Bracket 12V Fan Control- SATA Interface Power Supply SATA 1Knob
#adAdjustment method: 1 Manual Adjustment Knob. Increase speed to reduce computer part temperature when computer parts are busy. Material knob cooling fan speed Controller adopts plastic and metal materials, reliable, durable, with low loss and low heat.
More information #ad
Universalwidely used for pc computer water cooling system, easy to install. Fan interface: 4piN 3PIN Can be connected. Power supply Interface: SATA interface. Save spacesinloon pc 8 channels fan hub the governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space.| Brand | SinLoon #ad |
| Manufacturer | mandyyan #ad |
| Part Number | 11 |
More information #ad
8. ELECTOP
#adElectop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
#adIn the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
More information #ad
The ten fans will spin at the same speed, you will have 10 fans at 50%. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Please note 4pin fan speed can be adjusted by temperature control. If the chassis fan is configured in bios to run at 50%, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. You can connect to the CPU fan lead on the system board or the chassis fan lead. Since the mainboard can only receive one rotation speed signal, but no speed signal. Red is expected to be a pass through for the cpu fan.
| Brand | ELECTOP #ad |
| Manufacturer | Electop #ad |
| Part Number | CPUCOOL-1-10-4P |
| Model | 4328444952 |
More information #ad
9. KLLsmDesign
#ad8 4 Pin Fan Speed Controller Ports, KLLsmDesign Pwm Fan Temperature Controller Integrator, Remote Control Computer RGB Light Adapter, 10 5v 3pin A-RGB Ports ，with Magnet （White）
#adMore information #ad
Supports 5v motherboards such as ASUS, Gigabyte, and ASRock. Pwm fan controller: the back uses a magnet device, msi, which is easy to be attached to the inside of the chassis for easy installation. Accessories: the package contains rgb fan thermostat x1, temperature control cable x1, SATA power cable x1, motherboard sync cable x1. There are about 365 light modes to choose from. Wireless remote control function: the controller is equipped with a wireless remote control switch, which can freely switch between the hosting mode and the remote control mode.
| Brand | KLLsmDesign #ad |
| Manufacturer | KLLsmDesign #ad |
| Height | 0.12 Inches |
| Length | 4.65 Inches |
| Width | 2.17 Inches |
| Part Number | PC-Fan Hub-White |
More information #ad
10. Kingwin
#adFits 3.5 Bay, Kingwin Fan Controller 4 Channel w/LED, Easy Control of Your Cooling Fans
#adMore information #ad
| Brand | Kingwin #ad |
| Manufacturer | KWI Technology Inc./Kingwin #ad |
| Height | 4 Inches |
| Length | 6 Inches |
| Width | 2 Inches |
| Part Number | FPX-008 |
| Model | FPX-008 |
| Warranty | 1 |
More information #ad
