As an Amazon Associate I earn from qualifying purchases.
Geekworm #ad - User manualrefer to geekworm wiki search n300; installation video refer to wiKi. Good heat dissipationadd 5mm thick spin heat sink at the bottom to enhance the case heat dissipation and protect Raspberry Pi 4B from overheating.
Wifi descriptionwith black acrylic translucent plate to maximize compatibility with WiFi and Bluetooth signals, almost no weakness for WiFi and Bluetooth signals. For raspberry pi 4 psu: recommend to use geekworm UL listed 5V 4A Type-C power adapter ASIN:B09J856PND.
Geekworm #ad - Geekworm raspberry pi 4 passive cooling aluminum case - p173 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version;. For raspberry pi 4 psu: recommend to use geekworm UL listed 5V 4A Type-C power adapter ASIN:B09J856PND.
Reserve the TF Card slot for easy access. Design with good heat dissipation, passive cooling design, net weight up to 184 grams, don't need to install the cooling fan or heatsink, this is a heatsink case.
Geekworm #ad - All ports and slots of the aluminum alloy case can match with Raspberry Pi 4 Model B computer perfectly; Add 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable. Reinforced aluminum material, lightweight and durable, long-lasting stainless.
Note: if you think the blue Thermal Tape is not good enough for heat dissaption, you can replace it with thin 05mm cooper heatsink match with silicone grease recommend Shin-Etsu Shin-tsu X-23-7921-5 for better heat dissaption.
With 3 pieces thermal pads the thickness is only 05mm to touch the shell body to dissipate heat. Open case design, don't need to worry about affect wifi signal, it is a good raspberry pi 4 heatsink case with good heat dissaption. Geekworm raspberry pi 4 armor case, aluminum alloy metal case specially designed for the Raspberry Pi 4 Computer Model B 1GB/2GB/4GB/8GB.
Geekworm #ad - Packing list: 1 x acrylic case; 1 x Pack of Screws. For the installation, please refer to Installation Guide in the product description. The raspberry pi or the expansion board is not included.
Compatible with raspberry pi 4 model b/ pi 3 model b+ / pi3 model b/ 2B / B+ and Pi Hat expansion board Like X706 UPS/X728 UPS. This is protection solution for non-standard boards running boards on top of the raspberry pi, but Please note, this case only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need.
Geekworm #ad - Note: the raspberry pi 4 model b is not included in the packing list. Geekworm raspberry pi 4 passive cooling aluminum case is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB 2GB 4GB 8GB version.
For raspberry pi 4 psu: recommend to use geekworm UL listed 5V 4A Type-C power adapter ASIN:B09J856PND. The case for raspberry pi 3b+/3b, refer to P170 ASIN: B07KG5ZPKT. Made of high quality aluminum material.
Design with good heat dissipation, come with 5pcs thermal tapes to attach on CPU, don't need to install the cooling fan or heatsink, ram and usb chip of raspberry pi 4 for better heat conductivity, passive cooling design, with 4 rubber feet pads to attach at the buttom of case.
Geekworm #ad - Made of high quality aluminum material. Note: the raspberry pi 4 model b is not included in the packing list. For raspberry pi 4 psu: recommend to use geekworm UL listed 5V 4A Type-C power adapter ASIN:B09J856PND.
With 4 aluminum columns to contact with the Raspberry Pi 4 chips for better heat dissaption. Design with good heat dissipation, passive cooling design, don't need to install the cooling fan or heatsink.
Geekworm #ad - Note: x832-c1 case does not support X832 V1. 0&x835. Hdd thicknesssupport max. Geekworm new update x832-c1 metal case for installing x832 v1. 2 3. 5" sata boardasin:b08ckbmjs1, x735 power management boardasin:b07r45w1ln & Raspberry Pi 4 Model B computer.
When use with x735 board, the power supply must only be connected to X832 DC5521 12V IN port NOT X735. Installation video refer to WiKi search X832-C1.
Geekworm #ad - Easy access to all raspberry pi 4 ports, such as GPIO, TF Card, Micro HDMI, USB-C Power Supply ". Add copper heatsink for better coolingequipped with a CPU copper heatsinkto replace the thermal pad to attach with CPU grease on CPU of Pi4 for better heat dissaption Not include CPU grease.
Passive cooling aluminum alloy casegeekworm raspberry pi 4 case - p330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version; Cool your Raspberry Pi 4 without fans and noise.
Geekworm #ad - Dual fan - low power consumption Design, Dual Cooling Expericnce, More powerful heat dissipation. With 2 or 3 pieces thermal pads the thickness is only 05mm to touch the shell body to dissipate heat.
Note: if you think the blue Thermal Tape is not good enough for heat dissaption, you can replce it with thin 05mm cooper heatsink match with silicone grease recommend Shin-Etsu Shin-tsu X-23-7921-5 for better heat dissaption.
Geekworm #ad - Support raspbian/ubuntu/Kali/Retropie system, provide driver and image, please refer to WiKiuser manual. Lcd type: tft; lcd driver ic: ili9486l; lcd interface: spi up to 125mhz spi input, max fps: 50mhz; touch screen type: resistive; touch screen controller: xpt2046; colors: 65536; Backlight: LED; Resolution: 320*480 Pixel; Backlight Current: 120ma; Power: 016a x 5v; operating Temp.
The black abs case only suitable for this 3. 5 inch screen with raspberry Pi 4 Model B, do not support other Raspberry Pi versions.
1. Geekworm
#adRaspberry Pi 4 Heatsink Case Compatible with Raspberry Pi 4B, Pi 4B, Raspberry Pi 4 Model B CNC Ultra-Thin Aluminum Alloy Metal Passive Cooling Case, Pi 4 Only N300, Geekworm Raspberry Pi 4 Case
#adWifi descriptionwith black acrylic translucent plate to maximize compatibility with WiFi and Bluetooth signals, almost no weakness for WiFi and Bluetooth signals. For raspberry pi 4 psu: recommend to use geekworm UL listed 5V 4A Type-C power adapter ASIN:B09J856PND.
More information #ad
Ultra-thin designultra-thin with ONLY 16mm thickness raspberry pi 4 aluminum cnc case. Compatible withcnc aluminum alloy case customize for raspberry Pi 4, support Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version. Model: N300 Pi4 interface availableaccess to all ports of Raspberry Pi 4 Model B computer, raspberry pi 4 passive cooling case with better heat dissaption.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.24 Pounds |
| Width | 0 Inches |
| Part Number | TB-2019-36 |
| Warranty | 3 months |
More information #ad
2. Geekworm
#adGeekworm Raspberry Pi 4 Aluminum Case, Raspberry Pi 4 Model B Heavy Duty Passive Cooling Metal Case/Housing with Heatsink Pillar for Raspberry Pi 4B Only-Black P173
#adReserve the TF Card slot for easy access. Design with good heat dissipation, passive cooling design, net weight up to 184 grams, don't need to install the cooling fan or heatsink, this is a heatsink case.
More information #ad
Made of high quality aluminum material. Equipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease not included on two sides of copper heatsink to get better heat dissipation. Note: the raspberry pi 4 model b is not included in the packing list. Access to all ports of raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 1.3 Inches |
| Length | 0 Inches |
| Weight | 0.32 Pounds |
| Width | 0 Inches |
| Part Number | TB-2019-45 |
| Warranty | 3 months |
More information #ad
3. Geekworm
#adGeekworm Raspberry Pi 4 Armor Case, Raspberry Pi 4 Computer Model B Armor Aluminum Alloy Passive Cooling Case Compatible with Raspberry Pi 4 Model B Only
#adNote: if you think the blue Thermal Tape is not good enough for heat dissaption, you can replace it with thin 05mm cooper heatsink match with silicone grease recommend Shin-Etsu Shin-tsu X-23-7921-5 for better heat dissaption.
More information #ad
You can also use the CPU grease not included to get better heat dissipation. With 3 pieces thermal pads the thickness is only 05mm to touch the shell body to dissipate heat. Open case design, don't need to worry about affect wifi signal, it is a good raspberry pi 4 heatsink case with good heat dissaption. Geekworm raspberry pi 4 armor case, aluminum alloy metal case specially designed for the Raspberry Pi 4 Computer Model B 1GB/2GB/4GB/8GB.
| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.24 Pounds |
| Width | 0 Inches |
| Part Number | TB-2019-19 |
More information #ad
4. Geekworm
#ad2B, 3B, Raspberry Pi 3B+, B+ and Raspberry Pi Hat Expansion Board, Pi 4B Protective Acrylic Case for Raspberry Pi 4 Model B, Geekworm Raspberry Pi 4 Case, Raspberry Pi Universal HAT Size Case DIY Kit
#adCompatible with raspberry pi 4 model b/ pi 3 model b+ / pi3 model b/ 2B / B+ and Pi Hat expansion board Like X706 UPS/X728 UPS. This is protection solution for non-standard boards running boards on top of the raspberry pi, but Please note, this case only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need.
More information #ad
It is a perfect acrylic case diy kit to install raspberry pi hat expansion board with Raspberry Pi 4 Model B/ Pi 3 Model B plus / 2B / Pi 3 Model B+/ Pi3 Model B / B+ mother board together.| Brand | Geekworm #ad |
| Manufacturer | Geekwrom #ad |
| Height | 2.36 Inches |
| Length | 3.62 Inches |
| Weight | 0.07 Pounds |
| Width | 0.24 Inches |
| Part Number | TB-2017-37 |
| Model | TB-471905 |
More information #ad
5. Geekworm
#adRaspberry Pi 4 Model B Passive Cooling Heavy Duty Heatsink Case for Raspberry Pi 4 Model B/Pi 4B OnlyP171, Geekworm Raspberry Pi 4 Aluminum Case
#adFor raspberry pi 4 psu: recommend to use geekworm UL listed 5V 4A Type-C power adapter ASIN:B09J856PND. The case for raspberry pi 3b+/3b, refer to P170 ASIN: B07KG5ZPKT. Made of high quality aluminum material.
More information #ad
Access to all ports of raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable. With superstructure columns design of the upper cover, 5 columns contact with Raspberry Pi 4 CUP, RAM and USB Chip through thermal pads to transfer heat to aluminum case to protect Raspberry Pi 4 from overheating problem. Design with good heat dissipation, come with 5pcs thermal tapes to attach on CPU, don't need to install the cooling fan or heatsink, ram and usb chip of raspberry pi 4 for better heat conductivity, passive cooling design, with 4 rubber feet pads to attach at the buttom of case.
| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.26 Pounds |
| Width | 0 Inches |
| Part Number | TB-2019-42 |
| Warranty | 3 months |
More information #ad
6. Geekworm
#adRaspberry Pi 4 Aluminum Passive Cooling Case with Heatsink Pillar for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only P232, Pi 4 Heatsink Case, Geekworm Raspberry Pi 4 Case
#adWith 4 aluminum columns to contact with the Raspberry Pi 4 chips for better heat dissaption. Design with good heat dissipation, passive cooling design, don't need to install the cooling fan or heatsink.
More information #ad
New version raspberry pi 4 passive cooling aluminum case is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 2GB 4GB 8GB version;. Access to all ports of raspberry pi 4 model B, GPIO cable interface is reservered, support to install the gpio cable and TF card slot reserved.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.26 Pounds |
| Width | 0 Inches |
| Part Number | TB-2019-93 |
| Model | P232 |
| Warranty | 3 months |
More information #ad
7. Geekworm
#adGeekworm X832-C1 Metal Case Compatible with Raspberry Pi 4 & X832 V1.2 3.5" SATA Storage Board & X735 Power Management Board Not Support X832 V1.0/X835
#adWhen use with x735 board, the power supply must only be connected to X832 DC5521 12V IN port NOT X735. Installation video refer to WiKi search X832-C1.
More information #ad
Case dimensionsinstallation: 168x104x75mm / 6. 61x4. 09x2. 95inch;; vesa mount: 100mm3. 94inch; we do not open the tf card slot on the front for safety consideration, the users do not need to insert and remove the TF card frequently. 26. 1mm thickness 3. 5" sata hdd installation, support 17. 8mm & 26. 1mm 3. 5" sata hdd. Packing list: 1x x832-c1 metal case for x832 v1. 2, 1x power control switch, 3.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 2.95 Inches |
| Length | 6.61 Inches |
| Weight | 1.01 Pounds |
| Width | 4.09 Inches |
| Part Number | TB-2019-61 |
| Model | X832-C1 |
More information #ad
8. Geekworm
#adRaspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case P330, Geekworm Raspberry Pi 4 Case
#adPassive cooling aluminum alloy casegeekworm raspberry pi 4 case - p330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version; Cool your Raspberry Pi 4 without fans and noise.
More information #ad
Packing list1 x raspberry pi 4 aluminum alloy Case, 1 x Copper Heatsink, 1 x Screws Pack NoteNOT include raspberry pi board. Easy access to raspberry pi 4 portseasy installation. High quality aluminum materialSturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 1.14 Inches |
| Length | 3.54 Inches |
| Weight | 0.33 Pounds |
| Width | 2.48 Inches |
| Part Number | TB-2022-50 |
| Model | P330 |
| Warranty | 3 months |
More information #ad
9. Geekworm
#adRaspberry Pi 4 Computer Model B Armor Aluminum Alloy Passive Cooling Case Compatible with Raspberry Pi 4 Model B Only, Geekworm Raspberry Pi 4 Armor Case with Dual Fan
#adNote: if you think the blue Thermal Tape is not good enough for heat dissaption, you can replce it with thin 05mm cooper heatsink match with silicone grease recommend Shin-Etsu Shin-tsu X-23-7921-5 for better heat dissaption.
More information #ad
All ports and slots of the aluminum alloy case can match with Raspberry Pi 4 Model B computer perfectly. You can also use the CPU grease not included to get better heat dissipation. Open case design, don't need to worry about affect wifi signal. Geekworm raspberry pi 4 armor case with dual cooling fan, aluminum alloy metal case specially designed for the Raspberry Pi 4 Computer Model B 1GB/2GB/4GB/8GB.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0.75 Inches |
| Length | 3.39 Inches |
| Width | 2.17 Inches |
| Part Number | TB-2019-20 |
| Warranty | 3 months |
More information #ad
10. Geekworm
#adKali, Ubuntu, Max 50FPS 480x320 Pixel Monitor TFT Touch LCD Support Raspbian, 3.5 inch Touch Screen with ABS Case and Pi 4 Heatsinks Kit, Retropie System, Geekworm for Raspberry Pi 4 Model B
#adThe black abs case only suitable for this 3. 5 inch screen with raspberry Pi 4 Model B, do not support other Raspberry Pi versions.
More information #ad
Not support install cooling fan. Physical resolution 320 x 480, with resistive touch control; it supports up to 125MHz SPI signal input, showing stable and no flicker. The raspberry pi 4b mother board and cooling fan is not included in all the packing list. 2. For the document and download information, refer to Geekworm WiKi search 3. 5_lcd_b. Note: 1. 20~70 .| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 1.18 Inches |
| Length | 3.54 Inches |
| Weight | 0.09 Pounds |
| Width | 2.36 Inches |
| Part Number | TB-2019-35 |
More information #ad
