As an Amazon Associate I earn from qualifying purchases.
EZDIY-FAB #ad - New designed bracket to vertically show off gpu. Thanks to stretchable structure design, you would be able to connect HDMI, dp cable to your GPU without hassle, compatible to PC chassis with PCI grilles.
Please test the riser cable onto the gpu first before installing the GPU to vertical bracket mount. Please refer to length spec image and confirm that there is enough space of your chassis. High quality material increases structural toughness and supports the large graphics card weight on the market.
EZDIY-FAB #ad - Vertical gpu bracket with rgb led effects, mystic, r, synchronizable rgb lighting via motherboard AURA, b, d, Please note : Not Support 4pin RGB header +12V, g, g, fusion:support m/b 3 pin rgb header 5v, 12 volts can destroy LED.
Note: please check your case with enough space. Designed for most atx case with at least 7 PCIE slots in the market. Only supports PCIE 3. 0 . With movable bracket, more flexible in using PC case interior space.
PHANTEKS THERMAL SOLUTIONS #ad - 7 pci slot atx chassis required. Can be directly installed without modding in the Phanteks Eclipse P300A/P360A/P400A chassis. Premium and durable cable design supporting full Gen4 speeds.
EZDIY-FAB #ad - The 7-pci bracket slot can be replaced as a vertical mount for the graphics card. Not applicable for the chassis which PCI slots with grills, which will block DP/HDMI cable connection.
EZDIY-FAB #ad - Supports most 1, 2, and 3 slot graphic cards. Vertical gpu bracket with argb led lighting effects, r, synchronizable argb lighting via motherboard AURA, Please note : Not Support 4pin RGB header +12V, b, Mystic, g, G, fusion:support m/b 3 pin argb header 5v, d, 12 volts can destroy LED.
High quality material increases structural toughness and supports the large graphics card weight on the market. Please test the riser cable onto the gpu first before installing the GPU to vertical bracket mount.
Designed for most full/mid ATX tower with at least 7 available PCI slots. Supports pcie 4. 0/3. 0/2. 0/1. 0, rtx3060ti, rtx3070, rx6900xt, compatible with rtx3090, rtx3080, RX6800. Thanks to stretchable structure design, you would be able to connect HDMI, dp cable to your GPU without hassle, compatible to PC chassis with PCI grilles.
Phanteks #ad - Must change pci-e slot setting in bios to gen3/pci-e 3. 0 before installing the GPU to work with Gen4 / PCI-E 4. 0 gpus. Vertically display a VGA Graphics card. Compatible with chassis with “open” PCI slot design.
EZDIY-FAB #ad - The adjustable gpu bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud.
The latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm.
Lian Li #ad - In the condition of using the included riser cable pcie3. 0 with a pCIE 4. 0 motherboard and a PCIE 4. 0 gpu, please follow steps to set up your BIOS to make it compatible. Not" compatible with pci-e 4.
Cooler Master #ad - Cooler master riser cable version 2 included: A high quality Cooler Master version 2 riser cable completes the vertical GPU holder package. Compatible with all standard atx chassis: The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots.
Modular, instantly adjustable design: the position of the GPU can move back and forth to allow cables to pass through chassis with either closed or open PCI slots.
EZDIY-FAB #ad - Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape. Designed for most white atx case with at least 7 PCIE slots in the market, White metal bracket perfectly fit White case.
Please refer to length spec image and confirm that there is enough space inside the chassis. Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler.
1. EZDIY-FAB
#adVideo Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black, EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder
#adPlease test the riser cable onto the gpu first before installing the GPU to vertical bracket mount. Please refer to length spec image and confirm that there is enough space of your chassis. High quality material increases structural toughness and supports the large graphics card weight on the market.
More information #ad
Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots. Supports pcie 4. 0/3. 0/2. 0/1. 0, rtx3080, rtx3070, rx6900xt, compatible with RTX3090, rtx3060ti, RX6800.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | YIHPI333 |
| Model | SG-4.0CM GPU-B |
More information #ad
2. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black
#adNote: please check your case with enough space. Designed for most atx case with at least 7 PCIE slots in the market. Only supports PCIE 3. 0 . With movable bracket, more flexible in using PC case interior space.
More information #ad
Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler. The 20cm/7. 8in pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-3528 RGB GPU Bracket-B-with new riser |
| Model | US-3528 RGB GPU Bracket-B-with new riser |
More information #ad
3. PHANTEKS THERMAL SOLUTIONS
#ad220mm Flat Line PCI-E Gen4 x16 Riser Cable Kit, Phanteks PH-VGPUKT4.0_03 Gen4 Vertical GPU Bracket
#adMore information #ad
Rubber pads included to support graphics card weight to prevent GPU sag. Compatible with 1-slot, 2-slot, 3-slot and 4-slot graphics cards. Vertical mounting system for any graphics card. Pci-e gen4 x16 riser cable included with Dual layer induvial shielded cables.| Brand | PHANTEKS THERMAL SOLUTIONS #ad |
| Manufacturer | Phanteks #ad |
| Part Number | PH-VGPUKT4.0_03 |
| Model | PH-VGPUKT4.0_03 |
| Warranty | 1 year manufacturer |
More information #ad
4. EZDIY-FAB
#adVideo Card VGA Support Kit -Black, EZDIY-FAB Vertical Graphics Card Bracket PCIE Slot Plate, Vertical GPU Mount
#adMore information #ad
Supports general graphics card with 2 PCI brackets, doesn't support 3 PCI bracket card. The package doesn't contain riser cable, b08s71plxh, you could refer to EZDIY-FAB Riser Cable by searching B09NBB166J, B08SBMFCGG. Most affordable way to vertical your graphics card.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-EZ PCIE bracket-B |
| Model | JP-EZ PCIE bracket-B |
More information #ad
5. EZDIY-FAB
#adEZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black
#adHigh quality material increases structural toughness and supports the large graphics card weight on the market. Please test the riser cable onto the gpu first before installing the GPU to vertical bracket mount.
More information #ad
Please refer to length spec image and confirm that there is enough space of your chassis. New designed bracket to vertically show off gpu. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape. Designed for most full/mid ATX tower with at least 7 available PCI slots. Supports pcie 4. 0/3. 0/2. 0/1. 0, rtx3060ti, rtx3070, rx6900xt, compatible with rtx3090, rtx3080, RX6800. Thanks to stretchable structure design, you would be able to connect HDMI, dp cable to your GPU without hassle, compatible to PC chassis with PCI grilles.
| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-RGB 4.0CM GPU-B |
| Model | JP-RGB 4.0CM GPU-B |
More information #ad
6. Phanteks
#adPhanteks PH-VGPUKT_02 – Universal Vertical GPU Bracket with 220mm Flat Line Pci-E X16 Riser Cable Kit
#adMore information #ad
Pci slot required: 7. Supports PCIE3. 0/2. 0/1. 0 Compatible: 7+ open PCI slots. Material: Powder Coated Steel. Included 220mm riser cable. Gpu support: Dual Slot GPU. Modding might be required. Easy installation, placing tray over all seven PCI slot spaces.| Brand | Phanteks #ad |
| Manufacturer | Phanteks #ad |
| Height | 6.5 Inches |
| Length | 9.5 Inches |
| Weight | 0.95 pounds |
| Width | 6.5 Inches |
| Part Number | PH-VGPUKT_02 |
| Model | PH-VGPUKT_02 |
| Warranty | 2 year manufacturer |
More information #ad
7. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket Support with Multi-Angle,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black
#adThe latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm.
More information #ad
Before buying, please confirm whether there is enough space inside the chassis to install. Only support PCIE3. 0 For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling. The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | JP-Muti-VGA stand-B with new riser |
| Model | JP-Muti-VGA stand-B with new riser |
More information #ad
8. Lian Li
#adLian Li O11DXL-1X Vertical GPU Bracket KIT PCI-E 3.0 for O11Dynamic XL NOT Compatible with PCI-E 4.0 VGA Card
#adMore information #ad
0 vga card. Included pci-e riser cable, allows you to mount a PCI-E 16X Card. 5 slots offer builders more installation options. Allows you display graphics cards. Vertical graphics card holder for O11Dynamic XL with PCI-E 3. 0 riser Cable.| Brand | Lian Li #ad |
| Manufacturer | LIAN LI #ad |
| Height | 7 Inches |
| Length | 8 Inches |
| Weight | 0.22 Pounds |
| Width | 6 Inches |
| Part Number | O11DXL-1X |
| Model | O11DXL-1X |
| Warranty | 1 YEAR |
More information #ad
9. Cooler Master
#adCooler Master Master Accessory Vertical Graphics Card Holder Kit Version 2 with Premium Riser Cable PCI-E 3.0 x16-165mm, Compatible with All Standard ATX Chassis MCA-U000R-KFVK01
#adModular, instantly adjustable design: the position of the GPU can move back and forth to allow cables to pass through chassis with either closed or open PCI slots.
More information #ad
Durable, high quality materials: thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder. Showcase your graphics card: the vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler.| Brand | Cooler Master #ad |
| Manufacturer | Coolermaster #ad |
| Height | 4.76 Inches |
| Length | 7.24 Inches |
| Weight | 1.26 Pounds |
| Width | 5.59 Inches |
| Part Number | MCA-U000R-KFVK01 |
| Model | MCA-U000R-KFVK01 |
| Warranty | 1 Year |
More information #ad
10. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket,GPU Mount,Video Card VGA Support Kit with 20cm/7.8in PCIE 3.0 Riser Cable- White
#adPlease refer to length spec image and confirm that there is enough space inside the chassis. Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler.
More information #ad
High quality material increases structural toughness and supports the large graphics card weight on the market. Pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance. Only supports PCIE 3. 0 .| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-GPU Vertical holder-W with new riser |
| Model | US-GPU Vertical holder-W with new riser |
More information #ad
