As an Amazon Associate I earn from qualifying purchases.
DSD TECH #ad - Please note: iOS devices iPhone are not supported. Can be switched via at commands as master or slave mode, the device can be connected via AT commands specified. Bluetooth module hc-05 master and slave Two in one module.
HiLetgo #ad - Computer and peripheral devices. Works with any usb bluetooth adapters, running in slave role: Pair with BT dongle. The module is mainly used for short-range data wireless transmission, such as Bluetooth wireless data transmission, Industrial remote control, alarm, underground positioning, telemetry, Traffic, Smart home ect.
Led indicate bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane. Bluetooth version: v2.
Small size, low power consumption, high sensitivity for send and receive. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Core module uses hc-06, gnd, reserve led status output pin, txd, RXD, leads from the module interface includes vCC, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid.
ACEIRMC #ad - 2. Module working voltage 3. 6 v to 6V. 4. 6 pin dopunt cable : with this dupont cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board. 3. Hc-05 wireless bt module: with this hc 05 bluetooth module, such as: switch, and then you can use your android phone to control some gadgets, You can quickly add the Bluetooth feature to your Arduino project, LED.
Songhe #ad - With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment. Use the csr mainstream bluetooth chip, bluetooth V2. 0 protocol standards. Working current: matching for 30 MA, matching the communication for 8 MA.
HiLetgo #ad - Button: press the button, the module enter the AT mode. At commands are executed only in AT mode. The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.
0 devices. Hc-05 wireless BT Module. Master and slave 2-in-1 hc 05 module:working voltage 3. 6v to 6v, default baud rate:9600, Default pin:1234.
DORHEA #ad - Its communication is via serial communication which makes an easy way to interface with controller or PC. At commands are executed only in AT mode. It's ideal replacement to your wired serial connection.
Hc-05 wireless bt module: with this hc 05 bluetooth module, and then you can use your android phone to control some gadgets, such as: switch, You can quickly add the Bluetooth feature to your Ardu-ino project, LED.
HiLetgo #ad - At commands are executed only in AT mode. Master and slave 2-in-1 hc 05 module:working voltage 3. 6v to 6v, default baud rate:9600, Default pin:1234.
The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2. 0 devices. Hc-05 wireless BT Module. Hc-05 wireless bt module: with this hc 05 bluetooth module, such as: switch, you can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, LED.
HiLetgo #ad - Support at command, users can change the serial port baud rate, pairing password and other parameters as needed, device name, use flexible. Input voltage: 3. 3v/5v only needs a set of power supply.
Aideepen #ad - Hc-05 bluetooth module is an easy to use Bluetooth SPP Serial Port Protocol module, designed for transparent wireless serial connection setup. Its communication is via serial communication which makes an easy way to interface with controller or PC.
DSD TECH #ad - At commands are executed only in AT mode. Button: press the button, the module enter the AT mode. Hc-05 wireless bt module: with this hc 05 bluetooth module, such as: switch, you can quickly add the Bluetooth feature to your DIY project, and then you can use your android phone to control some gadgets, LED.
6 pin dupont cable : with this dupont Cable, you can easily connect this HC-05 Bluetooth module.
1. DSD TECH
#adDSD TECH HC-05 Bluetooth Serial Pass-through Module Wireless Serial Communication with Button for Arduino
#adMore information #ad
Use the csr bc417 mainstream bluetooth chip, bluetooth V2. 0 spp protocol standards. Default rate of 9600, default pin:1234, the user can be set up. Click the button into AT MODE. Module working voltage 3. 6 v to 6V.| Brand | DSD TECH #ad |
| Manufacturer | DSD TECH #ad |
| Height | 0.1 Inches |
| Length | 1.1 Inches |
| Weight | 0.02 Pounds |
| Width | 0.6 Inches |
| Part Number | HC05-001 |
| Model | HC-05 |
More information #ad
2. HiLetgo
#adHiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
#adLed indicate bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane. Bluetooth version: v2.
More information #ad
0+edr &operating voltage: 3. 3v &signal coverage: 30ft &host interface:uart &Storage Temperature:-40℃~+150℃&Item size: 4.3 * 1. 6 * 07cm &item weight: 3g. Industrial serial port bluetooth, drop-in replacement for wired serial connections, transparent usage. Small size, low power consumption, high sensitivity for send and receive. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Core module uses hc-06, gnd, reserve led status output pin, txd, RXD, leads from the module interface includes vCC, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid.
| Brand | HiLetgo #ad |
| Manufacturer | HiLetgo #ad |
| Part Number | 1002032008D |
More information #ad
3. ACEIRMC
#adACEIRMC HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino 3pcs
#adMore information #ad
5. Can be switched via at commands as master or slave mode, the device can be connected via AT commands specified. 1. Use the csr bc417 mainstream bluetooth chip, bluetooth V2. 0 spp protocol standards.| Brand | ACEIRMC #ad |
| Manufacturer | Organizer #ad |
| Warranty | 1 year |
More information #ad
4. Songhe
#adSonghe HC05 HC 05 Bluetooth Module RF Wireless Bluetooth Transceiver Module 6 Pins for Arduino 2PCS
#adMore information #ad
Dormancy current: no dormancy. Used for gps navigation system, water and electricity gas meter reading system. Potter default rate of 9600, the user can be set up.| Brand | Songhe #ad |
| Manufacturer | Songhe #ad |
| Part Number | P1 |
| Model | HC05 |
| Warranty | no |
More information #ad
5. HiLetgo
#adHiLetgo 2pcs HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino
#ad0 devices. Hc-05 wireless BT Module. Master and slave 2-in-1 hc 05 module:working voltage 3. 6v to 6v, default baud rate:9600, Default pin:1234.
More information #ad
Hc-05 wireless bt module: with this hc 05 bluetooth module, and then you can use your android phone to control some gadgets, such as: switch, You can quickly add the Bluetooth feature to your Arduino project, LED.6 pin dopunt cable : with this dupont cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.| Brand | HiLetgo #ad |
| Manufacturer | HiLetgo #ad |
| Part Number | KKshop-Adattatore |
More information #ad
6. DORHEA
#ad5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Ardu-ino
#adHc-05 wireless bt module: with this hc 05 bluetooth module, and then you can use your android phone to control some gadgets, such as: switch, You can quickly add the Bluetooth feature to your Ardu-ino project, LED.
More information #ad
Note: the module doesn’t suitable for IOS system. Hc-05 bluetooth module is an easy to use Bluetooth SPP Serial Port Protocol module, designed for transparent wireless serial connection setup. Hc-05 is able to operate in both master and slave mode. Master and slave 2-in-1 hc-05 module; working voltage 3. 6v to 6v; default baud rate:9600, Button: Press the button; the module enter the AT mode.| Brand | DORHEA #ad |
| Manufacturer | DORHEA #ad |
| Part Number | 14840-1 |
More information #ad
7. HiLetgo
#adHiLetgo HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino
#adThe factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2. 0 devices. Hc-05 wireless BT Module. Hc-05 wireless bt module: with this hc 05 bluetooth module, such as: switch, you can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, LED.
More information #ad
Button: press the button, the module enter the AT mode. 6 pin dopunt cable : with this dupont cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.| Brand | HiLetgo #ad |
| Manufacturer | HiLetgo #ad |
| Weight | 0.01 Pounds |
| Part Number | 3-01-1291-UK-1PC |
| Model | 8541554474 |
More information #ad
8. HiLetgo
#adHiLetgo 2pcs CC2540 CC2541 AT-09 Serial Wireless Module BLE 4.0 Bluetooth Module Compatible HM-10
#adMore information #ad
Compatible HM-10 . This module supports UART interface and supports SPP Bluetooth serial port protocol. It adopts cc2541 chip of american ti company, configures 256Kb space, and follows V4. 0 ble bluetooth specification.| Brand | HiLetgo #ad |
| Manufacturer | HiLetgo #ad |
More information #ad
9. Aideepen
#adAideepen 2pcs HC-05 Wireless Bluetooth Serial Transceiver Pass-Through Module Slave and Master 6 Pin Serial Communication for Arduino
#adMore information #ad
Note: this module does not suitable for IOS system. Hc-05 is able to operate in both master and slave mode. It's ideal replacement to your wired serial connection.| Brand | Aideepen #ad |
| Manufacturer | Aideepen #ad |
| Part Number | 70101182 |
More information #ad
10. DSD TECH
#adDSD TECH HC-05 Classic Bluetooth 2.0 Serial Wireless Module for UNO R3 Nano Basic Version
#ad6 pin dupont cable : with this dupont Cable, you can easily connect this HC-05 Bluetooth module.
More information #ad
Master and slave 2-in-1 hc 05 module:working voltage 3. 6v to 6v, default baud rate:9600, Default pin:1234. Why choose dsd tech brand: you not only get high-quality products, you can also get technical support and ONE YEAR WARRANTY. You can ask any questions about this HC05 module, our technical team is waiting for you.| Brand | DSD TECH #ad |
| Manufacturer | DSD TECH #ad |
| Height | 0.1 Inches |
| Length | 2 Inches |
| Weight | 0.01 Pounds |
| Width | 1.5 Inches |
| Part Number | HC05-BA-2 |
| Model | HC-05 |
More information #ad
