As an Amazon Associate I earn from qualifying purchases.
SMALLRIG #ad - For matte box 2660 smallrig rubber donut 58-114mm with rearing Opening 3409 is dedicated designed for SmallRig Light Matte Box 2660 Note points when you using this rubber donut, please connect an additional smallRig LWS Rod Support 2663 for Matte Box to support the matte box and prevent twisting.
Besides, it features four outside points for easy adjustment and reinforced linings to prevent vignetting as a result of collapse. Compact & lightweight the product dimensions is 114 x 40mm with weight only 87g.
Extraneous light barrier this rubber donut can be seamlessly attached to the lens and firmly connected to SmallRig Light Matte Box 2660, which means that it can block more extraneous light and make your pictures and videos clearer and more incredible than the connecting mode of adapter ring. Moreover, we attached a carrying bag for you to make it easy to store and carry around.
JTZ #ad - Material :made of high-quality cotton. Adapter ring is not included. Flexible fits for lens with thread up to 114mm. With lock thread for easily adjusting the diameter according to need. Package included: 1 × Universal donut. Size:7cm*13cm*17cm.
FocusFoto #ad - Front diameter: 17cm; back Diameter: 13cm; Height: about 7cm. With inner lining, it can absorb the light effectively. This universal cloth donut is specially designed for JTZ DP30 /FOTGA DP500III Matte box.
foto4easy #ad - Universal design for all camcorders and DSLRs & Industry standard 15mm supporting rods, center-to-center rails distance 60mm. Donuts are slightly flexible, light from the rear of the matte box can be blocked out, and the four sizes range to fit almost any lens diameter.
Each of the three flaps can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot.
For changing lenses quickly, which may be blocked by other rig accessories, or require rod extensions to fit, the unit features a swing away design at a 90 degrees and allow height adjustable. The kit includes one french flag, and two adjustable side wings. 2 dual-purpose filter trays, supporting 4x4" filter sizes One of the trays allow rotating 180 degrees.
Run Shuangyu #ad - A set of 4 “donut” rings are included. Size at 103mm, light from the rear of the matte box can be blocked out, 64mm, leaving only the camera lens protruding through. Universal design for all camcorders and DSLRs & Industry standard 15mm supporting rods, center-to-center rails distance 60mm.
The kit includes one french flag, and two adjustable side wings. Donuts are slightly flexible, 76mm, 51mm. By fitting one of these rings, and the four sizes range to fit almost any lens diameter.
This fotga dp3000 matte box m3 is a professional device universally designed to accommodate all DSLR's and camcorders and it compatible with any industry standard 15mm rail system. You can easily swing-away the mattebox without disturbing the camera from the tripod and rail system. You can free open from one sides, applied in the photographic process frequent replacement lenses and filters, easily and convenience.
FOTGA #ad - Instead of moving the mounting position of the matte box, it can simply be lifted one key to undo. Cnc machined，4x4 rotatable filter traysrugged & lightweight, Made of all metal CNC machined except for the matte box body and filter trays, in the case of ensuring the overall strength and minimize the weight.
No light reflection, height ajustableThe excellent extinction treatment inside of the matte box, can effectively block the glare and reflected light. Each of the three flags can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot.
All the flags can be folded and stored for easy carrying. Foldable clip-in type french flag and side flagsthe kit includes one foldable french flag, and two adjustable side wings. Support maximum of 14mm ultra-wide-angle lenses or large lenses up to 114mm in diameter. One-button releasing swing away stylefor changing lenses quickly, or require rod extensions to fit, which may be blocked by other rig accessories, the unit features a swing away mechanism at a 90 degrees and one key to unlock, automatic closure and allow height adjustable.
FOTGA #ad - A set of 4 “donut” rings are included. Size at 103mm, 64mm, 51mm. By fitting one of these rings, leaving only the camera lens protruding through. Universal design for all camcorders and DSLRs & Industry standard 15mm supporting rods, center-to-center rails distance 60mm.
With height adjustment feature so that the height of the Matte Box can be adjusted as per the the height of the camera lens. Donuts are slightly flexible, 76mm, light from the rear of the matte box can be blocked out, and the four sizes range to fit almost any lens diameter.
1. SMALLRIG
#ad3409, SmallRig Rubber Donut for Lenses with 58-114 Diameter, with Rear Opening for SmallRig Light Matte Box
#adBesides, it features four outside points for easy adjustment and reinforced linings to prevent vignetting as a result of collapse. Compact & lightweight the product dimensions is 114 x 40mm with weight only 87g.
More information #ad
You no longer need to change the adapter ring frequently, which not only saves time, so that the rubber donut can be directly mounts the front of lens of 58-114mm, but also improves efficiency. Wide range of compatibility the highly flexible gives a wide range of compatibility, and then snaps into Matte Box 2660 via a 114mm metal ring. Extraneous light barrier this rubber donut can be seamlessly attached to the lens and firmly connected to SmallRig Light Matte Box 2660, which means that it can block more extraneous light and make your pictures and videos clearer and more incredible than the connecting mode of adapter ring. Moreover, we attached a carrying bag for you to make it easy to store and carry around.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 1.57 Inches |
| Length | 4.49 Inches |
| Width | 4.49 Inches |
| Part Number | SRUS-VA-2021012802 |
| Model | 3409-SR |
More information #ad
2. JTZ
#adJTZ Flexible Lens Cloth Donut Knicker for DP30 Matte Box Fotga DP500III Matte Box
#adMore information #ad
| Brand | JTZ #ad |
| Manufacturer | JTZ #ad |
| Part Number | DP007 |
More information #ad
3. FocusFoto
#adJTZ Lens Cloth Donut Knicker for JTZ DP30 FOTGA DP500III Matte Box up to 114mm Large Lens
#adMore information #ad
The mount is adjustable, which fits for lens up to 114mm. Package included: 1x Universal Cloth Donut Adapter ring not included.| Brand | FocusFoto #ad |
| Manufacturer | JTZ #ad |
| Part Number | SUNDP007 |
More information #ad
4. JTZ
#adFotga Matte Box Lens Cloth Donut Knicker for DP500III Matte Box
#adJTZ #ad - Material :made of cotton. Specially designed for Fotga DP500III Matte box. Note: the matte box is not included! Package included: 1 × Universal donut.More information #ad
| Brand | JTZ #ad |
| Manufacturer | JTZ #ad |
| Part Number | DP123 |
More information #ad
5. FOTGA
#adFotga Lens Donut Kit for DP500III Matte Box
#adFOTGA #ad - Lens donut kit 104mm, 88mm, 98mm, 76mm, 84mm, 64mm for Fotga DP500III Matte Box. 1 x fotga Lens donut kit.More information #ad
| Brand | FOTGA #ad |
| Manufacturer | Fotga #ad |
| Part Number | DP131 |
More information #ad
6. foto4easy
#adFoto4easy 4x4 Swing Away Matte Box with Follow Focus 15mm Rail Rod Rig for DSLR Cameras Sony A7 A7R A7S A7II A7III A7IV A6000 A6400 A6600 Nikon Z6 Z7 Canon EOS R 5D 6D 7D Mark II III IV
#adEach of the three flaps can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot.
More information #ad
A set of 4 “donut” rings are included. Size at 103mm, 51mm. By fitting one of these rings, 64mm, 76mm, leaving only the camera lens protruding through. Instead of moving the mounting position of the matte box, it can simply be slid outwards with just one screw to undo. For changing lenses quickly, which may be blocked by other rig accessories, or require rod extensions to fit, the unit features a swing away design at a 90 degrees and allow height adjustable. The kit includes one french flag, and two adjustable side wings. 2 dual-purpose filter trays, supporting 4x4" filter sizes One of the trays allow rotating 180 degrees.
| Brand | foto4easy #ad |
| Manufacturer | Foto4easy #ad |
| Height | 5.7 Inches |
| Length | 10.8 Inches |
| Weight | 1.1 Pounds |
| Width | 9.4 Inches |
| Part Number | FFDP3024 |
More information #ad
7. Run Shuangyu
#adFotga DP3000 Matte Box Swing Away Quick Lens Change with French Flag & Filter Holders Fit 15mm Rail Rod Rig,for Canon Nikon Sony Panasonic GH4 GH5 GH5s DSLR Camera
#adThe kit includes one french flag, and two adjustable side wings. Donuts are slightly flexible, 76mm, 51mm. By fitting one of these rings, and the four sizes range to fit almost any lens diameter.
More information #ad
Each of the three flaps can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot. This fotga dp3000 matte box m3 is a professional device universally designed to accommodate all DSLR's and camcorders and it compatible with any industry standard 15mm rail system. You can easily swing-away the mattebox without disturbing the camera from the tripod and rail system. You can free open from one sides, applied in the photographic process frequent replacement lenses and filters, easily and convenience.
| Brand | Run Shuangyu #ad |
| Manufacturer | Run Shuangyu #ad |
| Height | 5.7 Inches |
| Length | 10.8 Inches |
| Width | 9.4 Inches |
| Part Number | DDDDP3024 |
More information #ad
8. FOTGA
#adFotga DP500III 15mm Rail 4x4 DSLR Swing-Away Lens Matte Box w/ Donuts for Sony A7 A7R A7S II III A9 GH5S GH6 Canon 5D 6D 7D II III IV C300 C500 D850 BMPCC 4K 6K Ursa Mini DSLR Video Cinema Camera
#adNo light reflection, height ajustableThe excellent extinction treatment inside of the matte box, can effectively block the glare and reflected light. Each of the three flags can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot.
More information #ad
Suitable for almost all cameras, compatible 14mm ultra wide-angle lens or 114mm front thread Lens Universal design for all DSLR cameras, video cameras, interchangeable-Lens cameras & Industry standard 15mm rod system and 19mm rod system. All the flags can be folded and stored for easy carrying. Foldable clip-in type french flag and side flagsthe kit includes one foldable french flag, and two adjustable side wings. Support maximum of 14mm ultra-wide-angle lenses or large lenses up to 114mm in diameter. One-button releasing swing away stylefor changing lenses quickly, or require rod extensions to fit, which may be blocked by other rig accessories, the unit features a swing away mechanism at a 90 degrees and one key to unlock, automatic closure and allow height adjustable.
| Brand | FOTGA #ad |
| Manufacturer | Fotga #ad |
| Height | 15 Inches |
| Length | 3.7 Inches |
| Width | 10.7 Inches |
| Part Number | DP085 |
| Model | DP085 |
More information #ad
9. FOTGA
#adFOTGA DP3000 M1 Pro Matte Box Sunshade + Donuts for 15mm Rod Rig Follow Focus DSLR Canon Mark 5D II III 7D Cameras etc.
#adWith height adjustment feature so that the height of the Matte Box can be adjusted as per the the height of the camera lens. Donuts are slightly flexible, 76mm, light from the rear of the matte box can be blocked out, and the four sizes range to fit almost any lens diameter.
More information #ad
The kit includes one french flag, and two adjustable side wings. Each of the three flaps can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot. You can adjust the height up to 45mm. Material: made of Metal and Plastic.| Brand | FOTGA #ad |
| Manufacturer | FOTGA #ad |
| Height | 3.8 Inches |
| Length | 15.2 Inches |
| Weight | 0.95 Pounds |
| Width | 6.8 Inches |
| Part Number | DP3022 |
| Model | DP3022 |
More information #ad
10. Cavision
#adCavision Universal Matte Box Donut Lens Adapter Ring, 85mm
#adCavision #ad - Compatibility: for lenses with an outer diameter of approx. Cavision universal donut adapter ring - Cavision 6 Month Limited Warranty for Personal Use 3 Months for Commercial Use. Materials: Aluminum and imitation leather.More information #ad
Depth: when cloth fully open: 45mm / 1. 77". 50 to 85mmfor use with the cavision 3 x 3 matteboxMay be used with the following Cavision matte boxes by using additional Cavision ARP series adapter rings:4 x 44 x 5. 6. Front o. D. 85mm / 3. 35".| Brand | Cavision #ad |
| Manufacturer | Cavision #ad |
| Height | 1.7 Inches |
| Length | 6.1 Inches |
| Weight | 0.3 Pounds |
| Width | 5.2 Inches |
| Part Number | ADU085-D45 |
| Model | 4332059640 |
More information #ad
