Top 10 Reed Sensor NC – Home Security Systems

As an Amazon Associate I earn from qualifying purchases.

1. uxcell

#ad

Uxcell N.C. Recessed Wired Security Window Door Contact Sensor Alarm Magnetic Reed Switch White RC-33 10pcs

#ad
uxcell #ad - It can only provide a switch signal to the transmitter. Specification - current: 05a ; voltage: 100v ; power rating: 10W; Action Distance: 10mm.

Widely usedl - this recessed Door Contact Sensor works with any access control or burglar alarm system available. Normally closed - n. C. Means normally closed: when the magnet together, the circuit is conductive light on ; when the magnet separates, the circuit is not conductive light off. Dimension - cable length: 25cm/9. 8"; total size: 17mm x 106mm/067" x 042" l*d. Note - the magnetic door switch must be installed according to the sensing distance. It cannot directly load the power, nor directly connect the lamp! .
Branduxcell #ad
Manufactureruxcell #ad
Height0.39 Inches
Length5.51 Inches
Width3.94 Inches
Part Numbera18051500ux0013
Modela18051500ux0013

2. INTELLid

#ad

1 White Recessed Screw Terminal Block Door Contacts NC Alarm Door Window Sensors with Magnetic Reed Switch. These 3/8” Door Contact Position switches DCS Work with All Burglar Alarm Systems

#ad
INTELLid #ad - Normally closed: when the door or window is open, the contact will give an open signal and when the door is closed the contact will give a closed circuit signal. This contact works with Any Access Control or Burglar Alarm System Available. 2 amp maximum Switch Current. 1 white abs normally closed miniature Door Contact Switch 5/8 by 3/8 with screw terminals to terminate alarm system wires. Will sense door closer at Roughly 1/2” or 10mm.
BrandINTELLid #ad
ManufacturerINTELLid #ad
Part NumberRSCWDCII-1

3. uxcell

#ad

Uxcell Surface Mount Wired NC Door Sensor Alarm Magnetic Reed Switch White MC-38

#ad
uxcell #ad - Means normally closed: when the magnet together, the circuit is conductive light on ; when the magnet separates, the circuit is not conductive light off.

Material - the magnetic switch alarm is with durable ABS housing for better rust resistance. Normally closed - n. C. Dimension - cable length: 26cm/1024"; total size: 27 x 14 x 7. 8mm / 1. 06" x 055" x 031" l*w*h. Applications - the wired door sensor is designed for use with window and door alarm systems, such as garage, industrial warehouse and shops, etc. Specification - current: 05a ; voltage: 100v ; power rating: 10W; Action Distance: 10~15mm.
Branduxcell #ad
Manufactureruxcell #ad
Height0.39 Inches
Length5.51 Inches
Width3.94 Inches
Part Numbera18051500ux0033
Modela18051500ux0033

4. uxcell

#ad

Uxcell Wired Door Contact Window Sensor NO NC Surface Mount Magnetic Reed Switch Black

#ad
uxcell #ad - Current: 05a; max. Installation dimension - installation Hole Size: 8x4mm; Installation Hole Distance: 15mm. Durable material - the magnetic switch alarm is with durable PVC housing for better rust resistance.

Specification - type: normally open no normally closed nc; max sensing distance: 10mm; cable length: 30cm/ 11. 8"; total size: 29x15. 35mm/ 11. 42" x 6. 04" l*w; max. No means normally open: when the magnet separates, the circuit is conductive light on ; when the magnet separates, the circuit is not conductive light off. Applications - the wired door sensor is designed for use with window and door alarm systems, and shops, industrial warehouse, such as the garage, etc. Normally open - nc means normally closed: when the magnet together, the circuit is conductive light on ; When the magnet together, the circuit is not conductive light off. Power: 10W. Voltage: 100V; Max.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera20082700ux0592

5. Actmei

#ad

10pcs RC-33 NC Recessed Wired Window Door Contact Sensor Alarm Magnetic Reed Switch White

#ad
Actmei #ad - Rc-33 nc recessed wired window Door Contact Sensor Alarm Magnetic Reed Switch. Magnet near together, the switch is closed. Br>and the switch and magnet is separate, the switch is open. Each sizeapprox: 17 x 106mm / 067 x 042-inch h*d cable LengthEach: 25cm / 9. 8-inch. Nc means normally closed:when the magnet together, the circuit is conductive light on ; when the magnet separate, the circuit is not conductive light off. Nc means normally closed: when the magnet together, the circuit is conductive light on ; when the magnet separate, the circuit is not conductive light off.
BrandActmei #ad
ManufacturerActmei #ad
Height0.4 Inches
Length0.67 Inches
Width0.42 Inches
Part NumberRC-33

6. SpzcdZa

#ad

2Sets Magnetic Reed Switch Normally Open Closed NC NO Door Alarm Window Security/Magnetic Door Switch/Magnetic Contact Switch/Reed Switch for GPS,Alarm or Other Device,DC 5V 12V 24V Light

#ad
SpzcdZa #ad - Package content: 2 sets x magnetic door swith; size: 55*12. 5*11. 5mm / 2. 17" x 045" x 045"l*w*h a package of screws for mounting on wood only. They are ideal for protecting doors, Surface-mounted magnetic contact, ideal wooden door or window use.

Magnetic contact sensors can be added to an existing wired Alarm Systems. We offer 12 hours quick response service. We promise to solve any problem for you. Great for alarm, led, relay, gps low voltage devices. Etc. Great for pick-ups with sliding rear window. Effective for Theft Deterrence. After-sales service if you do not satisfy with magnetic reed switch or if you have any questions, please come to us anytime.

We would solve all the problems to your satisfaction. Product name: magnetic door swith; maximum switch voltage: 100v;contact capacity: 500mA Maximum Switch Current;Rated Power: 10WMaximum Switch Power; Contact Type: NC/NO/COM, Trigger Range: 5-20mm;.
BrandSpzcdZa #ad
ManufacturerSpeedDa #ad
Weight0.04 Pounds
Part NumberM1706230002

7. uxcell

#ad

Uxcell Rolling Door Contact Magnetic Reed Switch Alarm with 3 Wires for N.O./N.C. Applications MC-58

#ad
uxcell #ad - Material - the magnetic switch alarm is with durable zinc alloy housing for better rust resistance. Applications - the rolling door contact is designed for use with window and door alarm systems, industrial warehouse and shops, such as garage, etc.

N. O. Specification - current: 05a ; voltage: 100v ; power rating: 10W; Action Distance: 30~50mm. N. C. Dimension - cable length: 25cm/9. 8"; total size: 104 x 15. 2 x 14. 8mm / 4. 09 x 06 x 058 inch l*W*H. N. O. N. C. Means normally open: when the magnet separates, the circuit is conductive light on ; when the magnet separates, the circuit is conductive light on ; When the magnet together, pls check carefully!. When make order, the circuit is not conductive light off. Means normally closed: when the magnet together, the circuit is not conductive light off.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera18051500ux0061
Modela18051500ux0061

8. Hxchen

#ad

Hxchen 3 Sets MC-31B NC & NO Door Window Contact Sensor Alarm Magnetic Reed Switch with Screws White

#ad
Hxchen #ad - Widely application: magnetic door switch great for alarm, led, gps low voltage devices. Etc. Great for pick-ups with sliding rear window. Package included: 3 sets x magnetic Door Swithes with Screws Model: MC-31B.

Type: surface-mounted magnetic contact, Screw Mounted for easily install, Screws are included here. Specification: product name: magnetic door swith; maximum switch voltage: 100v; contact Capacity: 05 amaximum switch current; rated power: 10w maximum Switch Power ; Contact Type: NC/NO/COM; Trigger Range: 5-20mm. Magnetic contact sensors also can be added to an existing wired Alarm Systems.

They are ideal for protecting doors, Surface-mounted magnetic contact, Relay, ideal wooden door or window use. About magnetic reed switch: output: change over, usually for NO use; Switch Type: NO/NC, nc and no, NC means Normally Closed; NO means Normally Open. Effective for Theft Deterrence.
BrandHxchen #ad
ManufacturerHxchen #ad

9. VictorsHome

#ad

VictorsHome Magnetic Reed Switch RC-33 NC Recessed Wired Window Door Contact Sensor for Home Security and Burglar Alarm Systems 5 Pcs

#ad
VictorsHome #ad - The load current is 120mA. Normally closednc - when the switch is close to the magnet, the circuit is conductivelight on; when the switch is separated from the magnet, the circuit is not conductivelight off.

Material - the switch housing is made of ABS flame retardant material and reed switch, is resistant to high temperature and deformation. The contact has fast reflection and accurate detection. Wide applications - work with all access control and burglar alarm systems. Can be installed in wooden or aluminum alloy doors and windows. Working conditions - when the magnetic door is energized, the voltage is controlled at DC 0V-24V and the supply current cannot exceed 1A. Actuation distance - 10mm transmitting distance.
BrandVictorsHome #ad
ManufacturerVictorsHome #ad
Height2.76 Inches
Length3.15 Inches
Width0.79 Inches
Part NumberZ20190924W01
ModelRC33

10. INTELLid

#ad

3 White Recessed Screw Terminal Block Door Contacts NC Alarm Door Window Sensors with Magnetic Reed Switch. These 3/8” Door Contact Position switches DCS Work with All Burglar Alarm Systems

#ad
INTELLid #ad - Will sense door closer at Roughly 1/2” or 10mm. This contact works with Any Access Control or Burglar Alarm System Available. Normally closed: when the door or window is open, the contact will give an open signal and when the door is closed the contact will give a closed circuit signal. 3 white abs normally closed miniature Door Contact Switch 5/8 by 3/8 with screw terminal block to terminate alarm system wires. 2 amp maximum Switch Current.
BrandINTELLid #ad
ManufacturerINTELLid #ad
Part NumberRSCWDCII-3