Top 10 Video Tripod System, Cayer BV30L – Complete Tripod Units

As an Amazon Associate I earn from qualifying purchases.

1. Cayer

#ad

Video Tripod System, Mid-Level Spreader, Plus 1 Bonus Quick Release Plate, DSLR Camcorder, Max Loading 13.2 LB, Cayer BV30L 72 inch- Professional Heavy Duty Aluminum Twin Tube Tripod, K3 Fluid Head

#ad
Cayer #ad - Fluid head features pre-set counterbalance, fixed fluid drags in both the pan and tilt axes, offers 360° panning and +90° / -70° tilt; Integrated Flat Base with 3/8"-16 thread makes the head versatile for most tripod, slider, jib or crane.

Supporting up to 13. 2 lb, this heavy duty tripod is designed for DSLR camcorde and interchangeable lens cameras. This fluid head tripod kit includes two quick release plates; each comes with a 1/4"-20 screw, and a 3/8"-16 screw, offers a sliding range of +20/-25mm. 13. 2 lb loading capacity | 33" to 72" height range | tilt angle +90° / -70° | 360° panning | 75mm Ball Diameter | Carrying Bag | Fluid Head | Video Camera Tripod Leg | 2 pcs of Quick Release Plates.

Featuring locking rubber buckles, this 2-stage video tripod with a built-in 75mm bowl; mid-level spreader provides enhanced stability by holding the camera tripod legs in locked position.
BrandCayer #ad
ManufacturerCayer #ad
Height6.69 Inches
Length36.61 Inches
Weight8.8 Pounds
Width7.01 Inches
Part NumberBV30L
ModelBV30L

2. Cayer

#ad

Max Loading 13.2 LB, 360 Degree Fluid Head for DSLR Camcorder Camera, Cayer BV30 Heavy Duty Video Tripod, 64 inches Professional Aluminum Tripod Leg with K3 Fluid Head, Mid-Level Spreader

#ad
Cayer #ad - The drag head also provides fixed counter balance, and tilt drag. Professional tripod kit: this video tripod system includes fluid head drag video head with 2-stage tripod and carry bag, features a fluid head with a wide platform to support both camcorders and DSLR cameras, and a 75mm half ball for quick leveling without adjusting the legs.

The easy link connector is a 3/8"-16 threaded hole in the side of the head that allows you to easily mount accessories to the fluid head itself, and not the camera. Each plate features both a 1/4"-20 and 3/8"-16 camera tie-down screws and has a sliding range of +20/-20mm to enable travel capabilities essential in balancing uneven configurations. Stable&adjustable tripod: this 2-stage fluid head tripod legs are constructed out of oval aluminum tubes for strength and durability, features a built-in 75mm bowl, allows you to adjust the height of the tripod from 32" to 64"; mid-level spreader provides enhanced stability by holding the tripod legs in locked position.

Fluid head: the video head supports a maximum weight load of 13. 2 pounds, pan, features a tilt range of -70°/+90° and provides a panning rotation of 360°. 2 universal qr plates: this heavy duty tripod kit provides 2 sliding quick release plates interchangeable with 501PL plates. Package includes: 1 x heavy duty fluid head tripod, 2 x hex keys, 2 x quick release plates, 1 x carrying bag, 1 x user manual.
BrandCayer #ad
ManufacturerCayer #ad
Height7.17 Inches
Length34.13 Inches
Weight8.49 Pounds
Width7.32 Inches
Part NumberBV30
ModelBV30

3. Cayer

#ad

Max Loading 13.2 LB, 2 Pan Bar Handles, Twin Tube Tripod Leg with K3 Fluid Drag Head, Cayer BV25LH Video Tripod System, 74 inch Carbon Fiber Professional Heavy Duty Camera Tripod Kit

#ad
Cayer #ad - Quick release plate: this video tripod includes a sliding plate compatible with 501PL plate; it comes with a 1/4"-20 screw, and a 3/8"-16 screw, offers a sliding range of +20/-25mm. Tripod leg: featuring locking rubber buckles, this 2-stage fluid head tripod with a built-in 75mm bowl; mid-level spreader provides enhanced stability by holding the tripod legs in locked position.

Pan tilt head: with 3/8" easy link connector for accessories, slider, independent pan/tilt locking, and detachable pan bar, this fluid head offers 360° panning and +90° / -70° tilt; The flat base mount with a standard 3/8'' thread makes the head versatile for most tripod, jib or crane.

Pro & durable: constructed from carbon fiber for long-lasting working while minimizing weight, this heavy duty tripod extends to 74" and supports up to 13. 2 lb, making it suitable for DSLR rigs, compact camcorders, and digital cinema cameras. Specification: fluid head | camera tripod leg | 2 pan handles | 13. 2 lb load capacity | 33. 5" to 74" height range | tilt angle +90° / -70° | 360° Panning | 75mm Ball Diameter | Carrying Bag.
BrandCayer #ad
ManufacturerCayer #ad
Height6.69 Inches
Length37.4 Inches
Weight8 Pounds
Width7.28 Inches
Part NumberBV25LH
ModelBV25LH

4. Cayer

#ad

74 inch Heavy Duty Aluminum Twin Tube Tripod Leg with 360 Degree H4 Video Fluid Head, Adjustable Mid-Level Spreader for DSLR Camcorder and Cameras, Cayer BF10L Professional Video Tripod Kit

#ad
Cayer #ad - Pro & durable:combining the innovative and stylish fluid video head with the 2-stage Aluminum professional video tripod, and for pro-style digital cine cameras, making it suitable for larger DSLR and mirrorless cameras, this video tripod extends to 74.4" and supports up to 13. 2 lb, camcorders. Product features:tilt range: -70°to +90° | pan range: 360 °| 60mm ball Diameter | Adjustable height: 33.

1" to 74. 4" | max load: 13. 2 lbs. Universal compatible:the slid-in plate comes with a 1/4"-20 screw, enabling users to attach a wide array of optional accessories, led lighting solutions, such as magic arms, suitable for most DSLR cameras and camcorders; the 3/8" easy link attachment thread on the side of the fluid head provides enhanced versatility and ergonomics, monitors, and a 3/8"-16 screw, etc. Professional fluid head:with fixed fluid drag in both the pan and tilt axes, slider, pre-set counterbalance with a detached adjustable pan bar, the 60 mm bowl head offers 360° panning and +90° / -70° tilt; The flat base mount with a standard 3/8" thread makes the head versatile for most tripod, jib or crane.

Adjustable & easy set up:featuring ergonomic quick-snap locks for quick setup, 2-stage aluminum twin leg with a 60mm bowl provides working height range of 33" to 74. 4"; adjustable mid-level spreader allows you to spread your tripod's legs extremely wide while remaining stable, accommodating a wide range of leg width from 18. 1" to 25. 2"; each leg on the tripod features a 60mm rubber articulating foot, providing a stable and versatile base for setting the tripod on most surfaces.
BrandCayer #ad
ManufacturerCayer #ad
Weight8.93 Pounds
Part NumberBF10L
ModelBF10L

5. GEEKOTO

#ad

Video Tripod System, Geekoto 72 inches Heavy Duty Tripod, Max Loading 33 LB, Mid-Level Spreader, Professional Aluminum Twin Tube Tripod, K3 Fluid Head, 360 Degree Fluid Head for DSLR Camcorder Camera

#ad
GEEKOTO #ad - Data list - 33 lb load capacity | 33" to 72" height range | tilt angle +90° / -70° | 360° panning | 70mm Ball Diameter | Carrying Bag | Fluid Head | Tripod Leg | Quick Release Plate. Fluid ball head- fluid head features pre-set counterbalance, fixed fluid drags in both the pan and tilt axes, slider, offers 360° panning and +90° / -70° tilt; Integrated Flat Base with 3/8"-16 thread makes the head versatile for most tripod, jib or crane.

Quick release- provided quick release plates, and a 3/8"-16 screw stored in a thread under the plate, each comes with a 1/4"-20 screw, offers a sliding range of +20/-25mm - to enable travel capabilities.

This 2-stage fluid head tripod with a built-in 70mm bowl; mid-level spreader provides enhanced stability by holding the tripod legs in locked position. Large load capacity- supports 33 LB, a professional video tripod system designed for HDSLR and interchangeable lens cameras. Stability- 3-section aluminum column legs featuring locking rubber buckles and the non-slip rubber feet.
BrandGEEKOTO #ad
ManufacturerGEEKOTO #ad
Part NumberUS-DV2

6. Cayer

#ad

Cayer CF2451 Video Tripod 67 inches Carbon Fiber Tripod Leg with Fluid Drag Head, 4-Section Compact DSLR Tripod Convertible to Monopod for DSLR Camera, Video Camcorder

#ad
Cayer #ad - Specifications: 13. 2 lb loading capacity | 25. 6" to 67. 4" height range | tilt angle +90° / -70° | 360° panning | 60mm Ball Diameter | Carrying Bag | Fluid Head | Tripod Leg. Profectional multi use: with 180° upward-folding legs, easily converts to a monopod by combining the center column with the detachable tripod leg; Reversible center volumn or short split-column especially ideal for macro and close-up photography; Suitable monopod feet: B077PTHWNC.

Pan tilt head: with 3/8" easy link connector for accessories, pre-set counterbalance with a fixed-length detached pan bar, fluid head pan/tilt locking, offers 360° panning and +90° / -70° tilt; The flat base mount with a standard 3/8'' thread makes the head versatile for most tripod, slider, jib or crane.

Compact but durable: constructed from carbon fiber for durability while minimizing weight, compact camcorders, making it suitable for DSLR rigs, folds to 25.6" and supports up to 13. 2 lb, and digital cinema cameras. Leveling center column: attached with a built-in half ball leveling base that tilts 15° in any direction to orient your DSLR camera.
BrandCayer #ad
ManufacturerCayer #ad
Height25.5 Inches
Length5.91 Inches
Weight6.61 Pounds
Width5.91 Inches
Part NumberCF2451
ModelCF2451

7. VILTROX

#ad

74" inch,Max Loading 10KG, VILTROX VX-18M Professional Heavy Duty Video Camcorder Tripod with Fluid Drag Head and Quick Release Plate, with Carrying Bag,Horseshoe Shaped Bracket

#ad
VILTROX #ad - Special rubber horseshoe, more stable than similar tripod. The max loading weight is 22 lbs. Great capacity. Practical design. A sliding qr plate. 60mm ball diameter. Vx-18m tripod system including a fluid drag video head features a tilt range of 90 degrees forward and 80 degrees back, head pans 360°making it possible for you to shoot sports and action photos, built-in bubble level indicator on the head ensures you quickly manage the horizontal level.

360° panoramic shooting. Ideal for digital camcorder weighing up to 13. 2 lbs, we have tested, making it a perfect match for studio applications and larger video cameras. Allows you to quickly level the head without having to readjust the legs, simpler to create Dutch angle shots without dangerously unbalancing the tripod.

A padded carry bag as a gift to keeps your tripod and head together and a lock ring attached to the legs helps keep the legs secured together during storage or transport. The side lock system allows the sliding qr plate to be aligned and slid in from the back, a sliding quick-release camera plate with 1/4″-20 and 3/8″-16 camera screws.
BrandVILTROX #ad
ManufacturerJYC Technology (HK) Co.,Ltd #ad
Weight8.71 Pounds
Part NumberVX-18M
ModelVX-18M

8. Cayer

#ad

1/4 and 3/8 Screws Sliding Plate for DSLR Cameras Video Camcorders, Cayer H4 Video Fluid Head, 2-Section Pan Bar Handle, Max Loading 13.2LB, Camera Tripod Fluid Drag Pan Head with 60 mm Flate Base

#ad
Cayer #ad - 501pl compatible quick release Plate with 1/4" and 3/8" Camera Screws. Specifications: tilt range: -70° to +90° | pan Range: 360° | Supports 13. 2 lb / 6kg. Fluid head features pre-set counterbalance, fixed fluid drags in both the pan and tilt axes, offers 360° panning and +90° / -70° tilt; Integrated Flat Base with 3/8"-16 thread makes the head versatile for most tripod, slider, jib or crane.60mm flat base with 3/8" threaded Mount, suitable for all tripods, light stands, monopods, and camera sliders.2-section pan Bar for right and left-handed operator.
BrandCayer #ad
ManufacturerCayer #ad
Height4 Inches
Length4 Inches
Weight1.5 Pounds
Width3 Inches
Part NumberH4
ModelH4

9. Regetek

#ad

Regetek 72 Inch Professional Heavy Duty Aluminum Adjustable Photography Camera Tripod Stand with 360 Degree Fluid Drag Pan Head & Carry Bag for for Canon Nikon DV DSLR Camcorder, Video Tripod System

#ad
Regetek #ad - Supper wear-resisting skidproof rubber base; Locking buckles. The tripod kit comes with a carry bag for easy transport. Compatible with canon, Sony, Olympus, video cameras, GoPro devices. Adjustable tripod height for different photography requirement. Compact and portableThe tripod kit comes with a carry bag for easy transport.

Tube diameter. Aluminum alloy construction; Upgraded 078" 20mm max. Sturdy & stable professional dv camera tripodheavy duty high strength 3-section Aluminum Twin Tube Tripod withMid-Level Spreader. Fluid drag ball headprecise camera position control: pre-set counterbalance, fixed fluid drags in both the pan and tilt axes, offers 360° panning and +90° / -60° tilt; Adjustable handle for easy angle adjustment. Built-in bubble level for horizontal position check.

Support left/Right Bar Handle. Large load capacitya 72-inch professional video tripod system supports 33 lb: designed for DSLR Cameras, camera slider, Video Camcorders, most tripod, jib or crane, Cine-Cams and its various attachments, HDSLR and interchangeable lens cameras. Universal compatible quick releaseeach quick release plates comes with 1/4 and 3/8 screws for easy on and off connections, Nikon, Panasonic & Pentax most digital cameras, Samsung, Non-slip gaskets for protecting and loading equipment better.
BrandRegetek #ad
ManufacturerRegetek #ad
Weight8.7 Pounds
Part NumberRegetek Video Tripod System TA60
Model3216588925

10. MAGNUS

#ad

Carry Case with Shoulder Strap, Spiked Feet with Rubber Covers. Plus Quick Release plate, Extends to 82”, Max Load 15 lb Mid-Level Spreader, Aluminum Video Tripod System with Fluid Head, Magnus VT-350

#ad
MAGNUS #ad - Flip-lock leg locks; Carry Case with Shoulder Strap Included. Portable video tripod system; Supports DSLRs, Small/Large Camcorders. 15 lb weight capacity, 82" max Height; Built-In Pan/Tilt Video Head. Integrated center column & Mid-Spreader; Three Leg Stages, Four Sections. Independent pan & tilt Locks; Quick Release Camera Plate Included.
BrandMAGNUS #ad
ManufacturerMagnus #ad
Height5.2 Inches
Length29.5 Inches
Width5.4 Inches
Part NumberVT-350
ModelVT350