As an Amazon Associate I earn from qualifying purchases.
TP-Link #ad - System level optimizations for more than 5km long-range wireless transmission only for paired Point-to-Point or Point-to-MultiPoint transmission. Built in 9dbi 2x2 dual polarized directional MIMO antenna.
Power consumption: 105 watts max, note: when deployed using passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Adjustable transmission power from 0 to 27dbm/500mw.
UeeVii #ad - 1000mpbs digital display wireless bridge, transmission/receiver flexible switching. 1gbps wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.
8g ieee 802. 11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability. Supports dynamic mimo power saving mode DMPS and automatic power-saving transmission APSD, safe and reliable.
Outdoor wireless bridges adopting low power consumption and high-performance design, simplifies construction, supports 24V POE power supply, is easy to install and deploy, the RF index and radiation index are in full compliance with national standards. The highest network speed that can be achieved max is 1Gbps. Cpe820 gigabit wireless wifi bridge is a 5. 8g long range wifi extender outdoor cpe with a digital tube display. The transmission speed between 2 bridges max is 1200Mbps.
UeeVii #ad - 100mpbs digital display bridge, support point-to-point, transmission/receiver flexible switching. Automatic power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3kmBarrier-free, actual application distance should be less than 3KM.
The fcc id: 2a6ej-cpe450, this device complies with part 15 of the fcc rules. Point-to-point pairing can be done by dialing without having to access the GUI, save much human work and cost, avoid the complex setup program, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional.
Accurate operating frequencies: The frequency range that complies with FCC Rule Parts 15E is 51801-52400 mhz and 5745. 0-5825. 0 mhz. Adopting low power consumption and high-performance design, the rf index and radiation index are in full compliance with national standardsFCC.
EnGenius #ad - No performance bottlenecking 10/100/1000 Ethernet Port allows the network to perform at its full potential 867mbps. Integrated antennas high gain 16 dBi Integrated Directional Antennas built into the device extends networks up to 5 miles.
Tycon Power Systems #ad - The ez-bridge-lt+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. Multiple ez-bridge-lt+ units can be connected in a mesh configuration to allow interconnecting more than two sites.
The ez-bridge-lt+ is a high power outdoor 250mw wireless bridge system operating in the 2. 4ghz unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec.
KuWFi #ad - Outdoor ethernet bridge Waterproof, AP + Bridge operation mode, dust proof, lighting protection. It transmits via wireless wifi, no need to access into GUI, its H/C switch ctrl the Master/Slave units, reducing the trouble of wiring cable. Tethering a series of iP Camera to this give you 'eyes on' places you might not otherwise see. Operating temperature: -30℃-55℃ Storage Temp: -40℃-70℃.
Point to point connection for wireless coverage multi-mode wireless ethernet bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance, for building to building wireless wifi bridge.
If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS. Easy to set cpe with IP cameras & networks DVR. Customer servicefor 30 days after the date of purchase, return your undamaged kuwfi line of sight wifi bridge and receive a full refund for ANY reason.
UeeVii #ad - At the same time, the bottom wireless driver is deeply optimized, with stronger anti-interference ability and better stability. Fcc id: 2a6ej-cpe450;accurate operating frequencies: the frequency range that complies with FCC Rule Parts 15E is 51801-52400 mhz and 5745. 0-5825. 0 mhz.
The cpe451 outdoor network bridge has made in-depth protocol optimization for wireless video surveillance transmission, ensuring high-speed video transmission. Cpe451 wireless bridges is a long-distance 5. 8g wireless transmission equipment, air as the medium for network data transmission, using wireless communication technology, long-distance point to point or point-to-multipoint interconnection, the maximum transmission distance can reach up to 2km.
It supports dynamic mimo power saving mode DMPS and automatic power saving transmission APSD to reduce equipment energy consumption. The maximum transmission speed between two bridges is 300Mbps, with a 100M network port, the highest network speed that can be reached is 100Mbps. Cpe451 ethernet bridge adopts low power consumption, high performance design, radio frequency index and radiation index are in full compliance with national standards.
TP-Link #ad - Non-sdn controllers work only with non-SDN APs. Limited lifetime warranty — backed by our industry-leading limited lifetime warranty and free 24/7 technical support, you can work with confidence. Indoor/outdoor use — the durable, weatherproof enclosure protects the access point against harsh outdoor conditions and provides stable wireless coverage up to 200m+ range at 2.
4ghz and 300m+ at 5GHz in outdoor settings. Sdn compatibility — for sdn usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version.
Discreet appearance can also fit with any indoor scenarios. Standalone mode also applies. For devices that are compatible with SDN firmware, please visit 'From the manufacturer - Q&A' section or TP-Link website. Multiple poe options for easy installation — Supports both 802. 3af/at poe & passive PoE power supply, making deployment effortless and flexible.
MokerLink #ad - It is powered by a 24v poe adapterincluded and supports dial pairing. The installation is very simple. This wifi outdoor bridge works at 5. 8ghz band, support 2-3km long-distance wireless transmission, automatically adjust the transmission power and channel, built-in 12dbi antenna, reduce signal interference, Max 900Mbps between the bridge, make wireless transmission more stable.
Set one of the cpe dip switches to h, the wan port connect to the POE Adapter POE Port, set it host and transmit the signal; and set the other CPE switch to C, no other configuration required. Full information led display, the number behind is the channel number, ip addressa, the S button can complete the setting, more clearly know the device status, include host-client modeH or C, the f button can switch the led display info, port /wifi/power led, a number will be displayed after the pairing is successful, signal strengthP, more conducive to debugging and maintenance.
It can be widely used indoor and outdoor, with complete ap function, security monitoring transmission, wireless coverage, seamless molding, lightning protection, support PtP, used for wifi access, PtMP1-4; Also support one single independent use, enterprise network, IP65 dustproof and waterproof, great for expanding your network wirelessly. Built-in independent hardware protection circuit and watchdog chip, view operating status, when working abnormally, it will automatically restart to maintain the continuity of wireless coverage; support WEB GUI management, support wifi analysis and configuration. Professional outdoor shell design, both set at the host mode, for home, maximum support 50+ users.
Ubiquiti nanostation locom5 features the CPE design that expanded the global Wireless ISP industry. 2 units ubiquiti nanostation loco m5 ready to install, featuring a panel antenna and dual-polarity performance, the NSLOCOM5 is ideal for Point-to-MultiPoint PtMP applications requiring high-performance CPE devices with a sleek form factor.
Ubiquiti versatile airos firmware technology enables high-performance, outdoor multi-point networking. The tdma airmax protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Airos provides features such as wireless settings, bridge or routing configuration and system management services.
1. TP-Link
#adTP-Link 2.4GHz N300 Long Range Outdoor CPE for PtP and PtMP Transmission | Point to Point Wireless Bridge | 9dBi, 5km+ | Passive PoE Powered w/ Free PoE Injector | Pharos Control CPE210
#adPower consumption: 105 watts max, note: when deployed using passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. Adjustable transmission power from 0 to 27dbm/500mw.
More information #ad
Centralized management system Pharos Control. Tp link pharos tdma time division Multiple Access technology improves product Performance in throughput, Capacity and latency Performance. Ap/ client/ ap router/ AP client router WISP operation modes. Passive poe adapter suppots up to 60 meter 200 Feet Power over Ethernet deployment and allows the device to be reset remotely. Connectivity technology: Wi-Fi Built In.| Brand | TP-Link #ad |
| Manufacturer | TP-Link #ad |
| Height | 2.36 Inches |
| Length | 8.82 Inches |
| Weight | 1.1 Pounds |
| Width | 3.11 Inches |
| Part Number | CPE210 |
| Model | CPE210 |
| Warranty | 2 Year Warranty |
More information #ad
2. UeeVii
#adIP65 Waterproof,2-Pack, Plug and Play,24V PoE Power, Lang Range Up to 3KM, UeeVii CPE820 5.8G 1Gbps Point to Point WiFi Outdoor CPE with 16dBi High-Gain Antenna, Gigabit Wireless Bridge
#ad8g ieee 802. 11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability. Supports dynamic mimo power saving mode DMPS and automatic power-saving transmission APSD, safe and reliable.
More information #ad
Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, and making the long-range wireless coverage, saving much human work and cost, data transmission, and wireless monitoring simple and professional. Outdoor wireless bridges adopting low power consumption and high-performance design, simplifies construction, supports 24V POE power supply, is easy to install and deploy, the RF index and radiation index are in full compliance with national standards. The highest network speed that can be achieved max is 1Gbps. Cpe820 gigabit wireless wifi bridge is a 5. 8g long range wifi extender outdoor cpe with a digital tube display. The transmission speed between 2 bridges max is 1200Mbps.
| Brand | UeeVii #ad |
| Manufacturer | UeeVii Shenzhen Yazhou Shang Technology Co., Ltd. #ad |
| Height | 2.76 Inches |
| Length | 9.84 Inches |
| Width | 3.54 Inches |
| Part Number | CPE820 |
| Model | CPE820 |
More information #ad
3. UeeVii
#adPoE Adapter, Wireless Bridge, UeeVii 5.8G Outdoor CPE Point to Point Long Range Access with 14DBi High Gain 22 Mimo Antenna, 2-Pack, 2 RJ45 LAN Ethernet Port
#adThe fcc id: 2a6ej-cpe450, this device complies with part 15 of the fcc rules. Point-to-point pairing can be done by dialing without having to access the GUI, save much human work and cost, avoid the complex setup program, and make the long-range wireless coverage, data transmission and wireless monitoring simple and professional.
More information #ad
Wds networking mode, point-to-multipoint, transmission/receiver automatic networking, video network dual compatible. Deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability. Accurate operating frequencies: The frequency range that complies with FCC Rule Parts 15E is 51801-52400 mhz and 5745. 0-5825. 0 mhz. Adopting low power consumption and high-performance design, the rf index and radiation index are in full compliance with national standardsFCC.
| Brand | UeeVii #ad |
| Manufacturer | UeeVii Shenzhen Yazhou Shang Technology Co., Ltd. #ad |
| Height | 3 Inches |
| Length | 12 Inches |
| Weight | 1.7 Pounds |
| Width | 7 Inches |
More information #ad
4. EnGenius
#adGigabit Port 2-Pack, 27dBm, EnGenius Technologies ENH500v3 Wi-Fi 5 Wave 2 Outdoor AC867 5GHz Plug-n-Play Wireless Bridge, 16 dBi High-Gain Antenna, IP55, PTP/PTMP, Long Range up to 5 Miles
#adMore information #ad
High powered 27 dbm high transmit power extends Wi-Fi building-to-building. Poe enabled allows for easy & hassle-free deployment. No trenching simulate ethernet connections without the need of excessive cabling. Wi-fi 5 device capable of speeds up to 867 Mbps on 5 GHz, 3x faster than N300 bridges.| Brand | EnGenius #ad |
| Manufacturer | EnGenius #ad |
| Height | 2.17 Inches |
| Length | 10.24 Inches |
| Weight | 3.8 Pounds |
| Width | 3.31 Inches |
| Part Number | ENH500v3 KIT |
| Model | ENH500v3 KIT |
| Warranty | 1 year manufacturer |
More information #ad
5. Tycon Power Systems
#adThe EZ-Bridge-Lite EZBR-0214+ High Power Outdoor Wireless Point to Point System
#adThe ez-bridge-lt+ is a high power outdoor 250mw wireless bridge system operating in the 2. 4ghz unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec.
More information #ad
It complies with the 802. 11g and n standards to insure interoperability. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access.| Brand | Tycon Power Systems #ad |
| Manufacturer | Tycon Power Systems #ad |
| Height | 9 Inches |
| Length | 14 Inches |
| Weight | 2 Pounds |
| Width | 9 Inches |
| Part Number | EZBR-0214+ |
| Model | EZBR-0214+ |
| Warranty | Tycon Systems Inc. products are warranted against defects in materials and workmanship for a period beginning on the date of original purchase and extending for a period, of at least 1 year to 3 years as specified in the individual product specification sheets. |
More information #ad
6. KuWFi
#adKuWFi 2-Pack 300Mbps Wireless Outdoor CPE Kit Point to- Point Wireless Access Point 2.4G WiFi Bridge Supports 1KM Transmission Distance Solution for PTP/PTMP Pre-Program
#adPoint to point connection for wireless coverage multi-mode wireless ethernet bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance, for building to building wireless wifi bridge.
More information #ad
What cpe120 iskuwfi cpe120 is an 300mbps outdoor wireless wifi bridge support 1km long range wifi extender with led display to configure the pt/ptmp connection, simple to built the PTP/PTMP connections, more stable Support AP and bridge operation mode, meet with multiple Wi-Fi transmission scheme demands. Multiple operation mode, for different network environment point to point/multi-point1-4 for elevator monitor/surveillance networks: Connect an IP Surveillance Camera to internet bridge CPE120’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS. Easy to set cpe with IP cameras & networks DVR. Customer servicefor 30 days after the date of purchase, return your undamaged kuwfi line of sight wifi bridge and receive a full refund for ANY reason.
| Brand | KuWFi #ad |
| Manufacturer | KuWFi #ad |
| Height | 3.94 Inches |
| Length | 9.06 Inches |
| Weight | 1.1 Pounds |
| Width | 1.18 Inches |
| Part Number | CPE120 |
| Model | CPE120 |
More information #ad
7. UeeVii
#ad5.8G Point to Point Wireless WiFi Bridge, UeeVii CPE451 Outdoor 2KM Long Range CPE with 12dBi High Gain Antenna,24V PoE Adapter,100Mbps RJ45 LAN Port, for Barn Garage Shop,2-Pack
#adThe cpe451 outdoor network bridge has made in-depth protocol optimization for wireless video surveillance transmission, ensuring high-speed video transmission. Cpe451 wireless bridges is a long-distance 5. 8g wireless transmission equipment, air as the medium for network data transmission, using wireless communication technology, long-distance point to point or point-to-multipoint interconnection, the maximum transmission distance can reach up to 2km.
More information #ad
This outdoor wifi bridge cpe adopts ab automatic networking, you only need to transfer one end to A as the master bridge and the other end to B as the slave bridge to complete the pointtopoint dial-up pairing. It supports dynamic mimo power saving mode DMPS and automatic power saving transmission APSD to reduce equipment energy consumption. The maximum transmission speed between two bridges is 300Mbps, with a 100M network port, the highest network speed that can be reached is 100Mbps. Cpe451 ethernet bridge adopts low power consumption, high performance design, radio frequency index and radiation index are in full compliance with national standards.
| Brand | UeeVii #ad |
| Manufacturer | UeeVii Shenzhen Yazhou Shang Technology Co., Ltd. #ad |
| Height | 11.26 Inches |
| Length | 8.11 Inches |
| Width | 2.6 Inches |
| Part Number | CPE451 |
| Model | CPE451 |
More information #ad
8. TP-Link
#adSeamless Roaming & MU-MIMO | PoE Powered | SDN Integrated | Cloud Access & App, TP-Link EAP225-Outdoor | Omada AC1200 Wireless Gigabit Outdoor Access Point | Business WiFi Solution w/ Mesh Support
#ad4ghz and 300m+ at 5GHz in outdoor settings. Sdn compatibility — for sdn usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version.
More information #ad
Sdn controllers work only with SDN Access Points, Switches & Gateways. Integrated into omada sdn — omada's software defined networking sdn platform integrates network devices including access points, switches & gateways with multiple control options offered - Omada Hardware controller, Omada Software Controller or Omada cloud-based controller*Contact TP-Link for Cloud-Based Controller Plan Details. Discreet appearance can also fit with any indoor scenarios. Standalone mode also applies. For devices that are compatible with SDN firmware, please visit 'From the manufacturer - Q&A' section or TP-Link website. Multiple poe options for easy installation — Supports both 802. 3af/at poe & passive PoE power supply, making deployment effortless and flexible.
| Brand | TP-Link #ad |
| Manufacturer | TP-Link #ad |
| Height | 1.05 Inches |
| Length | 8.46 Inches |
| Weight | 0.37 Pounds |
| Width | 1.81 Inches |
| Part Number | EAP225-Outdoor |
| Model | EAP225-Outdoor |
| Warranty | Limited Life Time Warranty |
More information #ad
9. MokerLink
#ad2 Pack, MokerLink WiFi Bridge, 5.8GHz 900Mbps 2-3KM Distance, 2 Ethernet Port, with PoE Adapter, Wireless Outdoor CPE for PtP and PtMP Transmission
#adSet one of the cpe dip switches to h, the wan port connect to the POE Adapter POE Port, set it host and transmit the signal; and set the other CPE switch to C, no other configuration required. Full information led display, the number behind is the channel number, ip addressa, the S button can complete the setting, more clearly know the device status, include host-client modeH or C, the f button can switch the led display info, port /wifi/power led, a number will be displayed after the pairing is successful, signal strengthP, more conducive to debugging and maintenance.
More information #ad
There are two 100mpbs ethernet ports, set it slave client and receive the signal; then reset, will automatically complete pairing, the LAN port connect to the LAN device. It can be widely used indoor and outdoor, with complete ap function, security monitoring transmission, wireless coverage, seamless molding, lightning protection, support PtP, used for wifi access, PtMP1-4; Also support one single independent use, enterprise network, IP65 dustproof and waterproof, great for expanding your network wirelessly. Built-in independent hardware protection circuit and watchdog chip, view operating status, when working abnormally, it will automatically restart to maintain the continuity of wireless coverage; support WEB GUI management, support wifi analysis and configuration. Professional outdoor shell design, both set at the host mode, for home, maximum support 50+ users.
| Brand | MokerLink #ad |
| Manufacturer | MokerLink #ad |
| Part Number | WB900M |
More information #ad
10. Ubiquiti Networks
#adUbiquiti LocoM5 X 2 Units Bridge Kit Complete Pre-Configured Nanostation Loco M5
#adUbiquiti Networks #ad - Nanostation locom5 can be deployed for Point-to-Point PtP bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE. Ubiquiti airmax technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments.Ubiquiti nanostation locom5 features the CPE design that expanded the global Wireless ISP industry. 2 units ubiquiti nanostation loco m5 ready to install, featuring a panel antenna and dual-polarity performance, the NSLOCOM5 is ideal for Point-to-MultiPoint PtMP applications requiring high-performance CPE devices with a sleek form factor.
More information #ad
Ubiquiti versatile airos firmware technology enables high-performance, outdoor multi-point networking. The tdma airmax protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Airos provides features such as wireless settings, bridge or routing configuration and system management services.
| Brand | Ubiquiti Networks #ad |
| Manufacturer | Ubiquiti Networks #ad |
| Weight | 2.01 Pounds |
| Part Number | LocoM5X2PRECONF |
| Model | 8541550611 |
More information #ad
