As an Amazon Associate I earn from qualifying purchases.
Compatible with dji ronin s, monitor, ronin sc, standard adapter Top Cold Shoe mount, Crane 2/Crane plus/Crane V2/Feiyu AK4000 Ak2000 mobile Gimbal. Works perfect as stabilizer dji ronin s accessories. Unibody l shape bracket - handle grip is designed with increased strength.
Double usage allowed - use it as a dual grip for your gimbal, you may order two pieces together and use as integrated grip with greater scalability for more professional photography & shooting: It would save a lot of weight from your arms expecially when comes with heavy camera. Quality material - Lightweight Aerospace Aluminum Alloy.

Lightweight and durable: made of carbon fiber, lightweight yet solid and durable so to safely secure gears to the gimble grip and easy to hold.
You can hold it tightly without worrying about the falling off due to enduring application. Non-slip design: the 2 handles are made of rubber with anti-slip design to increase friction. Multiple 1/4-inch screw holes: 1/4 inch screw threads holes on the grip enable you to connect field monitor, led light, Bluetooth remote or any other accessories to your cameras. Note:not support DJI Ronin-S.

Comfortable to hold and effective to improve your shooting experience. Additional 2 years warranty. Mutilple connectionsfeatures 1/4 and 3/8 locating holes for ARRI standard that allows you to attach more accesseroies, such as magic arm monitor microphone or LED light.




Mounting pointsthe extension ring is equipped with a lot of 1/4’’-20 threaded holes that allow you to attach more accessories, such as SmallRig magic arm 2070 and Cold Shoe 1960 Handheld setupit allows mounting a rod clamp and then two 15mm rods with Shoulder Pad 2077, as well as Handle 998 to hold your Zhiyun Crane 2/V2 on your shoulder.
This clamp can be attached to 4 positions on the Crane 2, and 1 position on the Crane V2 handle as shown in the picture. Locating point for arrifeatures 3/8’’ locating holes for arri standard on the side allowing to be attached an Anti-Rotation Magic Arm 2026 to hold your monitor.

Anti-slip designthe silicon grip is an anti-slip design and gives you more comfort when holding it. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. For dji rs 2/rscsmallrig sling grip 3028 is specially designed for dji rs 2/rsc 2 gimbal.
With two cold shoe mounts on top and side of the handgrip, sound receiver, it can be mounted with wireless go, and Monitor Mount 2905.180 degree adjustmentoffering 180° adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip. Also, it features an anti-removal stud to ensure a safe and quick operation.

Buttery smooth movementsix gimbal modes, are all easily accessible on CRANE 2S: Pan Following, following, Locking, from basic to advanced, Vortex, Full-Range POV, Go mode. Bigger screen the new 096" oled screen offers a bigger vision.
Transmount ecosystemthe transmount ecosystem of accessories is here to better serve videographers with TransMount image transmission system, servo zoom/focus motors, quick setup kits, monopod, etc. With it, you will be able to go through the entire menu within seconds and switch between different modes.

Each thumbscrew features slots for Allen wrench to tighten the mounting screws. Note: please use the hex spanner to re-tighten the thumbscrew to ensure safe. 360° tilt rangethe monitor bracket features 360° tilt and can hold a monitor rig up to 2.
Please note that it can only support monitor up to 1kg. Rosette mounting plate for ronin-s/scthe mount attaches to the mounting threads for zhiyun crane 3, crane 3s, or weebill lab with a built-in thumbscrew, weebill-s, and a rosette adapter plate is included to attach the mount to the DJI Ronin-S or Ronin-SC with two included M4 screws. Firm lockingthe robust mount features a rubber pad to protect your monitor from scratching.
1. Agimbalgear
#ad
DH03 Handheld Gimbal Grip with Cold Shoe for Mounting Monitors, Microphones, Ronin SC 2, Plus, LED Light etc Compatible with DJI Ronin-S, Crane 2, Zhiyun Weebill LAB, Moza Air Mini Dual Grip
#adAgimbalgear #ad - Enables you to shoot at wider or lower angles at ease. More monting options - copper colored stainless steel locking nut also offers 1/4" screw thread configuration for continued extension tripod / rod / pole use.Compatible with dji ronin s, monitor, ronin sc, standard adapter Top Cold Shoe mount, Crane 2/Crane plus/Crane V2/Feiyu AK4000 Ak2000 mobile Gimbal. Works perfect as stabilizer dji ronin s accessories. Unibody l shape bracket - handle grip is designed with increased strength.
More information #ad
Durable quality but lightweight. Universal compatibility - handheld gimbal adapter bracket comes with 4 x double sided 1/4'' and 3/8'' threaded hole, rsc 2, can add microphone, rs 2 zhiyun weebill lab, LED video light all OK. Double usage allowed - use it as a dual grip for your gimbal, you may order two pieces together and use as integrated grip with greater scalability for more professional photography & shooting: It would save a lot of weight from your arms expecially when comes with heavy camera. Quality material - Lightweight Aerospace Aluminum Alloy.
Brand | Agimbalgear #ad |
Manufacturer | Agimbalgear #ad |
Part Number | DH03 |
Model | DH03 |
More information #ad
2. Neewer
#ad
Neewer Carbon Fiber Dual Handle Grip, Diameter Adjustable 25-45mm Compatible with Zhiyun Crane 2/Crane V2/Crane Plus/Crane/Crane M/ Feiyu G6 Plus/A1000/A2000/MOZA Air Aircross Gimbals Only Grip
#adNeewer #ad - Adjustable holder socket design: suitable for gimbles diameter within 098-1. 77 inch/25-45 mm, crane, crane v2, crane plus, feiyu g6 plus, compatible with zhiyun Crane 2, A2000, Crane M, a1000, MOZA Air Aircross and other gimbles as long as its diameter is from 25-45mm.Lightweight and durable: made of carbon fiber, lightweight yet solid and durable so to safely secure gears to the gimble grip and easy to hold.
More information #ad
Multi-choices of holding ways: provide various shooting ways including positive grip gesture and inverted grip gesture; Can realize shooting in different angles, and finish the shooting in most of circumstances. You can hold it tightly without worrying about the falling off due to enduring application. Non-slip design: the 2 handles are made of rubber with anti-slip design to increase friction. Multiple 1/4-inch screw holes: 1/4 inch screw threads holes on the grip enable you to connect field monitor, led light, Bluetooth remote or any other accessories to your cameras. Note:not support DJI Ronin-S.
Brand | Neewer #ad |
Manufacturer | Neewer #ad |
Weight | 1.75 Pounds |
Part Number | 10093965 |
Model | 10093965 |
More information #ad
3. decade
#ad
DECADE Universal Left Side Handle Grip Compatible with DJI Ronin S/Zhiyun Crane 2/Crane V2 Series Gimbal Stabilizer
#addecade #ad - What’s in the boxyou can get the handle grip and great shooting experience with your gimbal. The rubber cushion on the bottom is helpful to protect from scratching. Lightweight and durablecnc aluminum alloy body and rubber grip protector.Comfortable to hold and effective to improve your shooting experience. Additional 2 years warranty. Mutilple connectionsfeatures 1/4 and 3/8 locating holes for ARRI standard that allows you to attach more accesseroies, such as magic arm monitor microphone or LED light.
More information #ad
Easy to carryquick disassembly and assembly for easy storage and carrying. Suitable for multiple modelsthe l shaped grip is designed for zhiyun and dji gimbal stabilizers. Suitable for dji ronin s/zhiyun crane, crane plus, crane 2, Crane V2, Crane M/Feiyu Gimbal Moza and other Handheld Gimbal which has 1/4 Screw.Brand | decade #ad |
Manufacturer | DECADE #ad |
Part Number | L01 |
More information #ad
4. zhi yun
#ad
Zhiyun Mini Dual Grip Lite New Version, Transmount Single Handle Grip L Bracket Rig 1/4 Screw Connector for Zhiyun Crane 2 2S Plus Crane M V2 Series DJI Ronin-S SC Handheld Gimbal Stabilizer
#adzhi yun #ad - Suitable for zhiyun crane 2 crane Plus Crane M Series and other Handheld Gimbal which has 1/4 Screw. Enables you to mount on monitor or microphone or fill light on Single Mini Dual Handheld Grip used with Gimbal Stabilizer.More information #ad
Brand | zhi yun #ad |
Manufacturer | Zhiyun #ad |
Height | 0.98 Inches |
Length | 0.98 Inches |
Weight | 0.52 Pounds |
Width | 0.98 Inches |
Part Number | TransMount Mini Dual Grip |
Model | TransMount Mini Dual Grip |
More information #ad
5. zhi yun
#ad
DJI Ronin-S SC, Transmount Single Grip L Bracket Rig, Zhiyun Handle Grip LIte, 1/4 Screw Connector for Zhiyun Crane 2S Plus, Zhiyun 2S
#adzhi yun #ad - Wrist strap comfortable and anti-slip. Universal compatibilitythis mini dual grip perfect Compatible with Zhiyun Crane 2S, Feiyutech Gimbal Stabilizer, Smooth 4, DJI Ronin S, . Ease the weight of the setup. Hold the grip tight.More information #ad
Suitable for zhiyun crane 2 Crane Plus Crane M Series and other Handheld Gimbal. Adopts soft material brings better feelings and stable operation. Big screw base tighten it to the 1/4" threaded hole at the bottom of your gimbal. Quality materialmini size and lightweight only 053ibs. No worry accident caused by hand slippery.Brand | zhi yun #ad |
Manufacturer | ZHIYUN #ad |
Part Number | ZHIYUN_Mini Dual Grip Lite_BR1F02 |
More information #ad
6. DF DIGITALFOTO
#ad
DF DIGITALFOTO Handheld Ring Grip,Dual Handlebar Ring with Gear Adapter Compatible with ZHIYUN Crane 3S Stabilizer/Ronin S Gimbal,Etc
#adDF DIGITALFOTO #ad - Outline size: 700*535mm, inner size: 620*485mm. Material: Alloy Aluminum. Tube diameter : 25mm, Max Payload: 15kg. We will arrange your parcel asap after your order, After we ship it, usually will arrive within 7-15 workdays for any countries.More information #ad
Compatible with zhiyun crane 3s dji ronin S MOZA Air 2 Feiyu AK Series.Brand | DF DIGITALFOTO #ad |
Manufacturer | DF DIGITALFOTO #ad |
Height | 0.03 Inches |
Length | 0 Inches |
Weight | 5.51 Pounds |
Width | 0.02 Inches |
Part Number | Magic-Ring-new |
Warranty | One Year |
More information #ad
7. SMALLRIG
#ad
18 lb Payload- 2119, SMALLRIG Mounting Rod Clamp Ring for Zhiyun Crane2 Crane v2 Crane Plus Gimbal Stabilizer for DSLR Camera with 1/4" & 3/8" Thread Locating Points
#adSMALLRIG #ad - Please notemax load: 8. 5kg18lbs. It could support most of the camera, microphone, led, camera handle, and camera accessories such as a monitor, etc. High customizationthe rod clamp is specially designed only for zhiyun crane2 / Crane v2 / Crane Plus handheld gimbal stabilizer.Mounting pointsthe extension ring is equipped with a lot of 1/4’’-20 threaded holes that allow you to attach more accessories, such as SmallRig magic arm 2070 and Cold Shoe 1960 Handheld setupit allows mounting a rod clamp and then two 15mm rods with Shoulder Pad 2077, as well as Handle 998 to hold your Zhiyun Crane 2/V2 on your shoulder.
More information #ad
This clamp can be attached to 4 positions on the Crane 2, and 1 position on the Crane V2 handle as shown in the picture. Locating point for arrifeatures 3/8’’ locating holes for arri standard on the side allowing to be attached an Anti-Rotation Magic Arm 2026 to hold your monitor.
Brand | SMALLRIG #ad |
Manufacturer | SMALLRIG #ad |
Height | 0.47 Inches |
Length | 3.31 Inches |
Weight | 0.21 Pounds |
Width | 2.62 Inches |
Part Number | 2119-AU |
Model | 4336305231 |
More information #ad
8. SMALLRIG
#ad
SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 Gimbal Handheld Stabilizer, 3028
#adSMALLRIG #ad - An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. This handle is designed to reduce arm fatigue during low angle shooting and make handling your RS 2 or RSC 2 handheld gimbal easier with this Sling Grip. Its sleek design and compact structure match perfectly with the stabilizer.Anti-slip designthe silicon grip is an anti-slip design and gives you more comfort when holding it. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. For dji rs 2/rscsmallrig sling grip 3028 is specially designed for dji rs 2/rsc 2 gimbal.
More information #ad
Quick release clampthe grip mounts onto the gimbal using a nato clamp and can support up to 13. 2 lb. It can work with smallrig Shoulder Strap KPAC2466 to reduce the arms burden. Multiple mounting pointsmultiple 1/4"-20 and arri 3/8"-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, sound receiver, it can be mounted with wireless go, and Monitor Mount 2905.180 degree adjustmentoffering 180° adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip. Also, it features an anti-removal stud to ensure a safe and quick operation.
Brand | SMALLRIG #ad |
Manufacturer | SMALLRIG #ad |
Height | 2.07 Inches |
Length | 5.28 Inches |
Weight | 0 Pounds |
Width | 1.65 Inches |
Part Number | 3028-SR |
More information #ad
9. zhi yun
#ad
Zhiyun Crane 2S 3-Axis Handheld Gimbal Stabilizer for DSLR Camera Mirrorless Cameras Professional Video Stabilizer Compatible with Sony Nikon Canon Panasonic LUMIX BMPCC 6K Crane2S New zhi yun Crane 2
#adzhi yun #ad - Crafted for perfectioncrane 2s is highly optimized in motor control algorithms and motor power, Panasonic S1H, and it can handle large cameras such as the BMPCC 6K, EOS 1DX Mark III, etc.Buttery smooth movementsix gimbal modes, are all easily accessible on CRANE 2S: Pan Following, following, Locking, from basic to advanced, Vortex, Full-Range POV, Go mode. Bigger screen the new 096" oled screen offers a bigger vision.
More information #ad
Powerful but lightweightthe handle of it is built with carbon fiber, lightening the physical burden of videographers without compromising the loading capacity of the gimbal. Transmount ecosystemthe transmount ecosystem of accessories is here to better serve videographers with TransMount image transmission system, servo zoom/focus motors, quick setup kits, monopod, etc. With it, you will be able to go through the entire menu within seconds and switch between different modes.
Brand | zhi yun #ad |
Manufacturer | Zhiyun #ad |
Height | 4.21 Inches |
Length | 14.02 Inches |
Weight | 6.83 Pounds |
Width | 12.4 Inches |
Part Number | ZY0084 |
Model | ZY0084 |
More information #ad
10. SMALLRIG
#ad
2889, SMALLRIG Adjustable Camera Monitor Mount for DJI Ronin-S/Ronin-SC & ZHIYUN Crane 2S/Crane 3/3S/WEEBILL-S & MOZA AirCross 2 Gimbals
#adSMALLRIG #ad - Also fits moza aircross 2for moza aircross2, please do attach the Mounting Plate 2826 first before attaching the monitor mount. High customizationsmallrig adjustable monitor mount 2889 can hold your monitor or accessory onto the handheld stabilizers.Each thumbscrew features slots for Allen wrench to tighten the mounting screws. Note: please use the hex spanner to re-tighten the thumbscrew to ensure safe. 360° tilt rangethe monitor bracket features 360° tilt and can hold a monitor rig up to 2.
More information #ad
2 lb. The mount is compatible with dji ronin-s/ronin-sc & zhiyun crane 2s/CRANE 3/3S/WEEBILL-S & MOZA AirCross 2 Gimbals. The monitor mount features three 1/4"-20 threads for additional accessories such as SmallRig Cold Shoe 1241 for microphone or sound receiver. Please note that it can only support monitor up to 1kg. Rosette mounting plate for ronin-s/scthe mount attaches to the mounting threads for zhiyun crane 3, crane 3s, or weebill lab with a built-in thumbscrew, weebill-s, and a rosette adapter plate is included to attach the mount to the DJI Ronin-S or Ronin-SC with two included M4 screws. Firm lockingthe robust mount features a rubber pad to protect your monitor from scratching.
Brand | SMALLRIG #ad |
Manufacturer | SMALLRIG #ad |
Height | 1.73 Inches |
Length | 5.28 Inches |
Weight | 0.19 Pounds |
Width | 1.3 Inches |
Part Number | 2889-TY |
More information #ad