Top 10 Zwave Controller Hub – Security & Surveillance Biometrics

As an Amazon Associate I earn from qualifying purchases.

1. Fibaro

#ad

Smart Home Management System, Fibaro FGHC2 EU Center 2 Z-Wave Hub, White

#ad
Fibaro #ad - Compatibile with Google Assistant and Amazon Alexa. Home center 2 gives users ability to write scripts in LUA, which extends the functionality of the system. Fibaro home center 2 is the brain and building all the installation of your home the whole system is based on the Z-Wave technology. Using the user-friendly configuration interface of Home Center 2, you can create advanced, pre-defined scenes. Its technical characteristics combine to make this home automation box a real computer ready to simplify your life every day.
BrandFibaro #ad
ManufacturerFIBARO #ad
Height1.65 Inches
Length7.28 Inches
Weight4.63 Pounds
Width8.86 Inches
Part NumberFGHC2
ModelFGHC2 EU

2. AEOTEC

#ad

Aeotec Z-Stick Gen5 Plus, Compatible with SmartThings, Works with Raspberry Pi 4, Z-Wave Plus USB to Create Your Own Z-Wave Hub, SmartStart and S2 Enabled, HomeSeer and Others

#ad
AEOTEC #ad - Z-wave Plus certified. And can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wireless firmware upgrades. Works with raspberry pi, windows, mac, Linux to create a z wave hub for control of Z-Wave and Z-Wave Plus devices.

No software included. Non Plus edition. More secure than standard z-stick gen5. Compatible with z-wave enabled, openhab, home automation software including Home Assistant, home seer, Indigo 7, and OpenHab2. Faster than standard z-stick gen5. Z-wave Plus certification number. Upgraded to offer z-wave security 2 s2 encryption, ecdh key exchange, this Plus edition of Z-Stick is enhanced with AES 128-bit encryption, and pro-security grade UL 1023 compliance.

Now supports smartstart device installation when used with compatible software connect Z-Wave devices simply by scanning compatible QR codes. Easier device setup than standard z-stick Gen5. Plus edition offers a 50% speed performance when communicating securely vs.
BrandAEOTEC #ad
ManufacturerAeotec #ad
ModelZW090-A

3. ZOOZ

#ad

Garage Doors, and More | 2 NO-C-NC Relays 20A, Zooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, 10A | Signal Repeater | Hub Required Compatible with SmartThings and Hubitat, Sprinklers

#ad
ZOOZ #ad - 2 smart inputs: monitor 12-24 v or dry contact inputs separately from the dry contact outputs. Remembers and restores on/off status after power failure. Connect an optional wall switch for physical on/off control or use your Z-Wave hub required, sold separately for wireless control. Jumper wires NOT included.

This product is noT supported by Wink or Z-Wave alarm panels. The device is etl certified and conforms with North American safety standards. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Do not power with 110 v! new 700 z-wave: enjoy better signal coverage and a stronger z-wave repeater for your mesh network with the latest 700 series chip. Use the inputs to trigger the outputs automatically. Perfect to automate your garage door opener use a single zen17 to control up to 2 garage doors independently, motorized blinds, whole house fan, doorbell, commercial gates, sprinklers, gas fireplace, pool pump, and any 1-240 V device up to 20 A.

Quick installation: power it with a 12-24 v ac/dc power source or a standard USB C cable included and a power supply sold separately. It comes with s2 authenticated security and SmartStart for easy pairing. 2 smart outputs: control 2 dry contact relays independently with one z-wave device. Choose from normally closed 10 A and normally open 20 A relays to automate almost any electrical device.
BrandZOOZ #ad
ManufacturerZooz #ad
Height3.5 Inches
Length2 Inches
Width5 Inches
ModelZEN17
Warranty12-month manufacturer warranty.

4. ZOOZ

#ad

Zooz 700 Series Z-Wave Plus S2 USB Stick ZST10 700, Great for DIY Smart Home Use with Home Assistant or HomeSeer Software

#ad
ZOOZ #ad - It means that you can fully benefit from your S2 sensors, switches, and plugs running on the latest Z-Wave chip. Just scan the qr codes from any SmartStart Z-Wave Plus accessories to your home automation interface and power them on. Smart start: supports the new quick and extra secure z-wave pairing method.

You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device. You'll need a dedicated computer pC, or Raspberry Pi, laptop, sold separately and home automation software of your choice not included to complete the system. S2 secure new 700 series z-wave plus: take advantage of the new 700 series Z-Wave with more range and S2 authenticated security protocol. What you need: this s2 700 series stick adds z-wave plus capability to your DIY smart home set-up.

Advanced z-wave: works great with the most popular software like Home Assitant with JS, Indigo, and HomeSeer. Make sure your smart home software supports this feature. Read before you buy: the z-wave stick is for advanced users only, NOT for beginners. Supports ota firmware updates works with Aeotec OTA firmware tool and and all of the latest Z-Wave library commands. They'll join automatically.
BrandZOOZ #ad
ManufacturerZOOZ #ad
Part NumberNA
ModelNA

5. GoControl

#ad

GoControl CECOMINOD016164 HUSBZB-1 USB Hub

#ad
GoControl #ad - Provides interface between PC and Z-Wave/Zigbee network. Z-wave plus certified for wide compatibility. Plugs into a standard USB port on the host device. Works with third-party home automation software. Appears as two 2 serial ports.
BrandGoControl #ad
ManufacturerNORTEK SECURITY & CONTROL LLC #ad
Height1 Inches
Length2.5 Inches
Width4 Inches
Part NumberHUSBZB-1
ModelCECOMINOD016164

6. AEOTEC

#ad

Aeotec Z-Stick Gen5 Z-Wave Hub Z-Wave Plus USB to Create Gateway Ordinary White

#ad
AEOTEC #ad - Package: 1x z-stick gen5, 1x Manual, the others are not included. No software included. Certification number: ZC10-15060006. Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.

Z-wave plus certified. Compatible with z-wave enabled, openHab, Home Seer, home automation software including Home Assistant, indigo 7, and OpenHab2. Works with windows / mac / linux / raspberry pi 4 2020 upgrade to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful. 1. 1 x 04 x 3. 5 inches in size and capable of controlling up to 232 different Z-Wave devices.
BrandAEOTEC #ad
ManufacturerAeon Labs LLC #ad
Height3.5 Inches
Length1.1 Inches
Weight0.04 Pounds
Width0.4 Inches
Part NumberZW090
ModelZW090
Warranty1 year warranty against manufacturer defects

7. CLOUDREAM

#ad

CLOUDREAM Adapter for Gamecube Controller, Super Smash Bros Switch Gamecube Adapter for WII U, Switch and PC. Support Turbo and Vibration Features. No Driver and No Lag & Gamecube Adapter

#ad
CLOUDREAM #ad - Support turbo feature that what turbo actually does is replicates the same button pushed by the user over and over again at an extremely fast rate, Enhance your gaming experience. 3 in 1 gamecube adapter - compatible with nintendo switch, wii u, pc windows & mac.

No lag and no drive install need. Up to eight player for wii u/switchNeed two adapter. Four player support - support nintendo switch, wii u, pc usb and mac os with the GC controller or wireless GC controllers. Super smash bros choice - you can play the super smash bros on wii u and switch, Plug the two usb into your console and then choice Mario or Luigi or what your want to battle with your friends. Note: you need enter ssb game by wii u remote control and only support ssb on wii u.

Plug and play - built in newest ic chip, just plug and then play your games. The gamecube adapter-self come with 180cm / 7086inch long cable allows you to play more freedom distance. Change the "switch/wii u" and PC mode at random. Works with gamecube controller or wavebird controller. Change the adapter button on wii u to play on WII U and Switch mode, Change the adapter button on PC to play on PC mode. 70 inch long cable - play more freedom no more distance limited.
BrandCLOUDREAM #ad
ManufacturerChuanghongtai-Tec #ad
Part NumberHS-WU025
ModelHS-WU025
WarrantyNo

8. May Flash

#ad

4 Port, PC USB and Switch, Mayflash GameCube Controller Adapter for Wii U

#ad
May Flash #ad - Compatible with windows xp, windows 7, Windows 8, vista, 32 bit and 64 bit and Mac OS under the PC mode. The gamecube controller adapter allows you to connect up to four GameCube controllers or wireless GameCube controllers to a Wii U system, PC USB, Switch. Supports the built-in vibration feedback with no delays by plugging the two USB ports of the adapter into your Wii U system or PC USB connector ports. Switch to “wii u” or “pc” mode by using the switch located on the side. The driver is required if you need the vibration feedback on the PC mode.
BrandMay Flash #ad
ManufacturerMAYFLASH #ad
Height1 Inches
Length5 Inches
Weight0.4 Pounds
Width4 Inches
Part NumberW012
ModelW012

9. Phoscon

#ad

ConBee II The Universal Zigbee USB Gateway

#ad
Phoscon #ad - Supported operating systems: windows 7 / 10, Ubuntu Linux AMD64, Raspbian and Docker. Strong signal range via power-amplifier. Local solution without cloud, no registration or Internet access needed. Universal zigbee USB gateway integrates Zigbee products across manufacturers. For pc, notebook, raspberry Pi or Mini-PC.
BrandPhoscon #ad
Manufacturerdresden elektronik #ad
Height0.35 Inches
Length2.36 Inches
Weight0.02 Pounds
Width0.71 Inches
Part NumberBN-600107_SML
ModelBN-600107

10. Greneric

#ad

Cooler Master PWM HUB,6 Ports for Addressable RGB Lighting with PWM,1 to 6 Multi Way Magnetic backplane Splitter 5V/3PIN RGB Case Fan Hub Adapter PWM ARGB Addressble Fan

#ad
Greneric #ad - Sata power: even with full loaded, it still can maintain stable output. Cooler master 1 to 6 multi way splitter 5v/3pin rgb case Fan Hub Adapter PWM ARGB Addressble Fan Power interface SATA. It can attach to any metallic surface with built-in magnets. Multi connection: up to 6 sets of addressable RGB 3-pin headers and PWM headers to meet your needs of connecting more devices. Space saving: it will save your space effectively and make the cable management easier, and make the inside case neat and tidy. Built-in magnet: this compact HUB easily fits inside your case.
BrandGreneric #ad
ManufacturerGreneric #ad
Height0.63 Inches
Length4.06 Inches
Width2.56 Inches
Part NumberMFX-ZHHN-1NNN6-R1
ModelMFX-ZHHN-1NNN6-R1