As an Amazon Associate I earn from qualifying purchases.
REXQualis #ad - Rexqualis nano v3. 0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system. The power source is automatically selected to the highest voltage source.
The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27.
AITRIP #ad - Comes with 3 packs of nano v3. 0 micro controller module, each nano v3. 0 micro controller module is equipped with 3pcs pin headers 2pcs 15pin headers +1pcs 6pin headers, no welding needed. Uses the ch340g instead of the ftdi ft232rl ic which can improve the transfer speed, increase the stability in windows and solve the issues with FTDI drivers bricking non-original chips, ATMEGA328P offers even more programming and data memory space.
Also it has 1 cable. The nano is using the chips atmega328P and CH340, Replace FT232RL. You can download ch340 Driver from download link in the product description below. Usb connection: the nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27; The power source is automatically selected to the high voltage source.
Deegoo #ad - Small arduino uno board:it is a smallest, rx, complete and breadboard friendly board. It's got a pin layout that works well with the Mini or the Basic Stamp TX, power and ground on the other. It has everything that arduino/genuino uno has electrically with more analog input pins and onboard +5V AREF jumper.
More breadboard space:nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, GND on one top, ATN, so users have more breadboard space.
Com/drive/folders/1phezjjtqw0vav34roivsazjf0ugmqjgn?usp=sharing; If you want it to work under Windows 10, please install the diver from this: https://drive. Google. Com/drive/folders/1tl6sVGVduyH1JHfaYdMqeMGKdo-rg3im?usp=sharing. Specification:the nano can be powered via the mini-b usb connection, 7-12v unregulated external power supply pin 30, or 5V regulated external power supply pin 27. Http://sparks. Gogo. Co. Nz/ch340
ACEIRMC #ad - You can start with various electronic projects by using the Arduino software IDE. 2. It uses the chip atmega328p ch340 instead of ft232rl. 4. Nano ch340 controller is a compact board similar to the UNO, smaller and breadboard-friendly than Diecimila.
5. Using atmel atmega328p-au mcu, support ISP download; Support USB download and Power. It has everything that arduino/genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
Keywishbot #ad - Our technical support team is always ready to answer your questions. Any questions, Please don not hesitate to contact us. The power source is automatically selected to the highest voltage source.
The nano can be powered via the mini-b usb connection, 6-20V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. It lacks only a dc power jack, and breadboard-friendly board based on the ATmega328P Arduino Nano 3.
The power source is automatically selected to the highest voltage source. This mini nano can be powered via the mini-b usb connection, 6-20V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. It has more or less the same functionality of the Duemilanove, and works with a Mini-B USB cable instead of a standard one.
MELIFE #ad - Input voltage recommended 7V-12V. Flash memory 32 kb atmega328 of which 2 KB used by bootloader. Microcontroller Nano V3. 0 atmega328P. Operating Voltage logic level 5V. Digital i/o pins 14 of which 6 provide PWM output.
KEYESTUDIO #ad - Supports external 5v~12v dc power supply, cool yellow-black design with nice solder connections, pop yellow silkscreen on black mask make it easy to read the pin labels. Keyestudio nano ch340 controller is a compact board similar to the R3 board, a small and breadboard-friendly board based on the ATmega328.
UGREEN #ad - Superspeed for transfer & charging: ugreen mini usb cable supports the speed at up to 480 Mbps for data transfer which is backward compliant with full-speed USB 1. 1 12 mbps and low-speed USB 1. 0 1. 5 mbps and provides 2A power charging for devices with mini port. The reinforced special designed srStrain Relief stress joints longer than others of this mini USB charger cable will never rupture and offer multiple protections for your cable.
Mini usb to usb: ugreen type a to mini b cable connects your usb-ready computer or usb hub to a digital camera like PowerShot ELPH / Rebel, Dash Cam, Sat Navigation, Zoom Mic, Game controller, Garmin GPS Receiver, old Phone and other devices with Mini B 5-Pin connector.
Premium aluminum housing provides safer and more reliable charging. Gold-plated connectors: corrosion-resistant bare copper conductors, and nylon braid shielding provide the mini USB charger with maximum conductivity, optimal signal clarity, gold-plated connectors, and shielding to minimize data loss and interference.
1. REXQualis
#adCompatible with Arduino Nano V3.0 Nano x 3 with 3 Cable, 3pcs Nano Board CH340 / ATmega328P with USB Cable, REXQualis Nano V3.0
#adThe nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27.
More information #ad
Rexqualis nano is a smallest, complete, and breadboard friendly board. It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. Rexqualis nano is using atmel atmega328p-au mcu, support ISP download and USB download, Power via the Mini-B USB.| Brand | REXQualis #ad |
| Manufacturer | REXQualis #ad |
| Part Number | RQ-NANO-01 |
More information #ad
2. AITRIP
#adAITRIP for Arduino Nano V3.0, Compatible with Arduino Nano V3.0 Nano x 3 With1 Cable, Nano Board CH340/ATmega328P with USB Cable
#adMore information #ad
It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. It is a smallest, complete, and breadboard friendly board. Also it has 1 cable. The nano is using the chips atmega328P and CH340, Replace FT232RL. You can download ch340 Driver from download link in the product description below. Usb connection: the nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27; The power source is automatically selected to the high voltage source.
| Brand | AITRIP #ad |
| Manufacturer | AiTrip #ad |
| Height | 1.77 Inches |
| Length | 0.7 Inches |
| Width | 0.23 Inches |
| Part Number | 15231 |
More information #ad
3. Deegoo
#adMini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino
#adMore breadboard space:nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, GND on one top, ATN, so users have more breadboard space.
More information #ad
Note: if you want it to work on a mac, you must turn off automatic updates before you install the driver, please install the diver from this: https://drive. Google. Com/drive/folders/1phezjjtqw0vav34roivsazjf0ugmqjgn?usp=sharing; If you want it to work under Windows 10, please install the diver from this: https://drive. Google. Com/drive/folders/1tl6sVGVduyH1JHfaYdMqeMGKdo-rg3im?usp=sharing. Specification:the nano can be powered via the mini-b usb connection, 7-12v unregulated external power supply pin 30, or 5V regulated external power supply pin 27. Http://sparks. Gogo. Co. Nz/ch340
| Brand | Deegoo #ad |
| Manufacturer | Deegoo #ad |
| Part Number | Mini Nano V3.0 ATmega328P |
More information #ad
4. PlatinumPower
#adPlatinumPower USB PC Cable Cord for Arduino UNO R3 Mega2560 Mega328 Nano
#adPlatinumPower #ad - Lifetime cable replacement Warranty! Orders ship Within 1 Business Day! Length: 6 Ft. Brand new high quality USB 2. 0 cable, 100% compatibility guaranteed.More information #ad
| Brand | PlatinumPower #ad |
| Manufacturer | PlatinumPower #ad |
More information #ad
5. ACEIRMC
#adFor Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board USB Cable for Arduino Nano 3pcs+3pcs USB Cable
#ad5. Using atmel atmega328p-au mcu, support ISP download; Support USB download and Power. It has everything that arduino/genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
More information #ad
3. It can be powered via usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. 1. Nano v3. 0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.| Brand | ACEIRMC #ad |
| Manufacturer | Organizer #ad |
| Part Number | 10519 |
More information #ad
6. Keywishbot
#adATmega328P Moudle Nano Board CH340 with USB Cable 5pcs Nano Board & 1pcs Cable, Keywishbot Compatible with Arduino Nano V3.0
#adThe nano can be powered via the mini-b usb connection, 6-20V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. It lacks only a dc power jack, and breadboard-friendly board based on the ATmega328P Arduino Nano 3.
More information #ad
X. The keywishbot nano is a small, complete, but in a different package. After-sales service - quick-responding technical support for free. The power source is automatically selected to the highest voltage source. This mini nano can be powered via the mini-b usb connection, 6-20V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. It has more or less the same functionality of the Duemilanove, and works with a Mini-B USB cable instead of a standard one.
| Brand | Keywishbot #ad |
| Manufacturer | Keywishbot #ad |
| Height | 0.39 Inches |
| Length | 1.18 Inches |
| Width | 0.79 Inches |
| Part Number | fba-KW-Nano-Nosolder-5pcs |
| Model | 8541582903 |
More information #ad
7. MELIFE
#adMELIFE Mini Nano V3.0 ATmega328P Microcontroller Board w Mini USB Cable for Arduino CH340 USB Driver 16Mhz Nano v3.0 ATMEGA328
#adMore information #ad
| Brand | MELIFE #ad |
| Manufacturer | MELIFE #ad |
| Part Number | M15523 |
More information #ad
8. KEYESTUDIO
#adKEYESTUDIO Nano Board +USB Cable for Arduino Nano V3.0 CH340 ATmega 328P Micro Controller Expansion Board 5V 16MHz
#adMore information #ad
How to use: search for "keyestudio wiki KS0173" in Google Chrome to get the wiki online tutorial for this product. Works the same as the original Nano V3, runs perfectly on programming software.| Brand | KEYESTUDIO #ad |
| Manufacturer | keyes #ad |
| Part Number | KS0173 |
More information #ad
9. UGREEN
#adUGREEN Mini USB Cable, Garmin Nuvi GPS, GPS Receiver, Dash Cam, A-Male to Mini-B Cord USB 2.0 Charger Cable Compatible with GoPro Hero 3+, PDA 3FT, SatNav, MP3 Player, PS3 Controller, Digital Camera
#adMini usb to usb: ugreen type a to mini b cable connects your usb-ready computer or usb hub to a digital camera like PowerShot ELPH / Rebel, Dash Cam, Sat Navigation, Zoom Mic, Game controller, Garmin GPS Receiver, old Phone and other devices with Mini B 5-Pin connector.
More information #ad
Durable & flexible: ultra-durable pvc jacket with 10, 000+ times bend test. Wide compatibility: a male to mini b cord is compatible with gopro hero hd, sony playstation-3 controller also named pS3 controller cord, compatible for Garmin GPS Receiver, zoom mic, HERO 3+, Sat Navigation, mp3 players, Astro A40 / Rebel / 50, Dash Cam, htc, digital cameras like canon powershot elph / EOS, Ti-84 and other devices with Mini b 5 Pin connector. Premium aluminum housing provides safer and more reliable charging. Gold-plated connectors: corrosion-resistant bare copper conductors, and nylon braid shielding provide the mini USB charger with maximum conductivity, optimal signal clarity, gold-plated connectors, and shielding to minimize data loss and interference.
| Brand | UGREEN #ad |
| Manufacturer | Ugreen Group Limited #ad |
| Height | 5.2 Inches |
| Length | 0.71 Inches |
| Weight | 0.09 Pounds |
| Width | 7.17 Inches |
| Part Number | 10355 |
| Model | 10355 |
More information #ad
