As an Amazon Associate I earn from qualifying purchases.
1. ThreeBulls #ad
ThreeBulls PWM Fan Hub, PC CPU Cooling 4 PIN/3PIN Fan Power Cable Hub Splitter Adapter Sleeved PWM Case Fan Splitter for 12V Desktop Computer Cooler Case Fans 1 to 5 Way 15.7 Inch #adThreeBulls #ad
- Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans. Excellent 4-pin pwm 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.
Widely compatible: the cable is one 4-pin female connector to 4-pin male connector, support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans.
Package contents: 1 black 15. 7 inch 1-to-5 splitter fan power supply extension cables, male to female connector plug. Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy.
2. DEEP COOL #ad
Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM, DEEPCOOL FH-10 Integrated Fan Hub, Occupying only One 4-pin Motherboard Header #adDEEP COOL #ad
- Only speed of Fan 1 can be identified by the system. Capable of connecting to 10 PC fans simultaneously for cooling the computer system. That is, all pwm fans will run at the same DUTY RATIO. Powered by a stable sata connection to the system PSU for up to 10 fans.
They will run at FULL SPEED. Velcro and screw mountings applicable for the tower interiors. If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time.
|Brand||DEEP COOL #ad|
3. GELRHONR #ad
SATA 1 to 8 Way12V 3 PIN Cooling Fan Splitter Controller Hub 3 Pin PWM for PC Desktop Computer Motherboard12V 3-Pin, Chassis Fan Hub #adGELRHONR #ad
- Sata cooling fan splitter suit for 12v 3pin fan 8 channels. Using sATA interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.
8 way without speed measurement and pwm function, you can manually adjust the gear position, start the fan at full speed LOW or low speed LOW, or turn off the fan. Built-in double-sided adhesive: this compact HUB easily fits inside your pc case.
Suit for 12v 3pin fan 8 channels. Using sata interface. Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire.
Easy installation:it is very easy to setup. It can be used to fix the hub in the chassis. Connect your rgb items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power.
4. DEEP COOL #ad
DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04 #adDEEP COOL #ad
- 4-port fan hub. Support PWM function. Support Cable management. Compatible with 3-pin/4-pin fans. Double-sided adhesive Installation.
|Brand||DEEP COOL #ad|
5. upHere #ad
UpHere 7-Port 4PIN SATA PWM 5V 3PIN ADDRESSABLE RGB Fan Hub/Splitter for 4-Pin & 3-Pin Case Fans in Black-P7PRGB #adupHere #ad
- The fan hub draw the pwm signal from motherboard and feedback fan speed to the motherboard and draw an ARGB signal from this cable only the speed of Fan 1 can be identified by the system. 03. Capable of connecting to 7 pc fans simultaneously for cooling the computer system.
Each port has its own PWM function and the fan speed can be adjustedat the same time. 04. Powered by system psu sata connection to ensure 12V stable power for up to 7 fans.
01. Uphere argb pwm fan hub - supports up to 7 fans （3pin/pwm 4pin/5v 3pin argb）, occupying only one 4-pin M/B FAN Header System Fan or CPU Fanand One 5V 3-pin ARGB Header.
02. Uphere p7p fan hub provides individually addressable rgb lighting with software control for unique lighting effects and colors. 5v argb header compatible with asus aura, asRock RGB, GIGABYTE and MSI RGB. 05. Easy and quick installation with a compact Design, upHere P7P Fan hub allows you to easily attach on the back of the PC case using pre-installed double-sided tape.
6. EZDIY-FAB #ad
Only Use One MB Header, EZDIY-FAB 10-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans #adEZDIY-FAB #ad
- If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. Power up to 10 pc fans from a Single 4-Pin Motherboard PWM Fan Header. There is eva double-sided adhesive in the package, which can be easily affixed to a flat place.
Since the mainboard can only receive one rotation speed signal, but no speed signal. They will run at FULL SPEED. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control. In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the White interface of FAN1 is the CPU fan dedicated interface with speed detection function.
7. SilverStone Technology #ad
SilverStone Technology Silverstone 8-Port PWM Fan Hub/Splitter for 4-Pin & 3-Pin Fans in Black SST-CPF04-USA Newest Version #adSilverStone Technology #ad
- 2200μf capacitor provides stable voltage. 1-to-8 pwm connectors. Attached 3 pin fans will run at maximum RPM. Support speed detection for accurately controlling fans.
Compact size at only 54mm w x 19mm H x 40mm D. Included 3m adhesive to apply anywhere within your case. Pwm 4pin header x 8, compatible with 3pin cable Speed control function is unavailable for 3 pin fans.
8. Toptekits #ad
2 Pack Toptekits Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Fan Hub SATA Controller,1 Female to 10 Male 4Pin Fan Hub Splitter Cable for 3Pin&4Pin PWM Cooling Fan #adToptekits #ad
- The orange interface is the dedicated interface for CPU fan, these black interface are conventional PWM fan interface. Pwm interface is connected to CPU FAN interface on motherboard by PWM cable.
Ide molex 1 to 10 way cooling fan splitter hub. Package includes: 1x toptekits 4pin interface 1 to 10 Way PCB Adapter, 1X Toptekits SATA interface 1 to 10 way PCB adapter. Toptekits computer/pc case fan controller power cable 1 Female to 10 Male 4Pin Fan Hub Splitter Cable for 3Pin&4Pin PWM Cooling Fan.
Designed for 12v 4-pin fan, support simultaneous starting of 10 channel 4-Pin fans, solving the problem of shortage of motherboard. Widely used for pc computer water cooling system. Eva double-sided adhesive can be used to fix the hub in the chassis. Support pwM function fan automatic speed regulation.
9. TeamProfitcom #ad
PWM Fan Hub PC 5 Way Splitter Sleeved PWM Fan Splitter Hub Adapter Cable for 12V Desktop Computer Cooler Case Fans 4-Pin & 3-Pin 14 inches 2 Pack TeamProfitcom #adTeamProfitcom #ad
- Connector: 1 female 4-pin connector & 4 Male 4-pin Connectors1 for 12V CPU and 4 for case fans;. Compatible with all 12v cpu and case fans with 4 pin or 3 pin connector; PLEASE NOTE: Do not exceed 12V, 2A total output.
Please check your devices specification when to use the PWM fan hub. Power up to 5 pc fans from a Single 4-Pin PWM Fan Header.
|Part Number||TeamProfitcom - 00012021|