As an Amazon Associate I earn from qualifying purchases.
LINKUP #ad - Newly revised pcie 4. 0 Over 64gb/s bi-directional true pcie 4. 0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount.
Designed for most full/mid ATX tower with at least 7 available PCI slots. Quality hand soldered gold-plated contacts for signal integrity.
Compatible with gpu - rtx3090, rtx3070, b550, rtx3060ti, rx6900XT, rtx3080, Z590. Re-engineered wires and connectors for PCIe 4. 0 85ohm applications for GPUs, M. 2 nvme ssD. Some cases may have mis-align screw holes and may cause the gpu to be off alignment when installed, causing damage to the GPU and the system. Heavy duty bracket to vertically show off gpu and water cooler.
Phanteks #ad - Pci slot required: 7. Easy installation, placing tray over all seven PCI slot spaces. Gpu support: Dual Slot GPU. Supports pcie3.
EZDIY-FAB #ad - Note: please check your case with enough space. Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler.
The 20cm/7. 8in pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance. Vertical gpu bracket with rgb led effects, g, g, b, synchronizable rgb lighting via motherboard aura, Mystic, D, R, fusion:Support M/B 3 pin RGB Header 5V, Please note : Not Support 4pin RGB header +12V, 12 volts can destroy LED.
Lian Li #ad - Pci-e 4. 0 riser Cable White. Vertical gpu bracket kit. Vertical gpu mount accessory for the O11D MINI. Bracket kit dimension: d180mm X W191. 5mm x h272. 5mm. Pcie riser cable : Gen 4. 0 .
EZDIY-FAB #ad - The latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm.
Only support PCIE3. 0 For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling. The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud.
Lian Li #ad - Not compatible with rtx 3080/3090 and PCIE 4. 0 Pci-e cable length: 200mm. Vertical gpu kit for PC-O11D dynamic. Not fit pc-o11d rog or o11DXL. Expansion Slot: 4. Material: SECC.
EZDIY-FAB #ad - Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler. Pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.
Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.
Lian Li #ad - Not" compatible with pci-e 4. 0 vga card. Included pci-e riser cable, allows you to mount a PCI-E 16X Card. Vertical graphics card holder for O11Dynamic XL with PCI-E 3. 0 riser Cable. Allows you display graphics cards. 5 slots offer builders more installation options.
IN WIN #ad - Package weight :2. 0lbs. Package dimensions :5. 5" l x5. 5" w x8. 0" h. Country of Origin :Taiwan. Product type :Computer Component.
1. LINKUP
#adLINKUP Vertical GPU Mount Loop Bracket Graphic Card Holder with LINKUP Ultra PCIe 4.0 X16 Gen4 Riser Cable 90 Degree Right Angle 20cm Black Kit
#adDesigned for most full/mid ATX tower with at least 7 available PCI slots. Quality hand soldered gold-plated contacts for signal integrity.
More information #ad
Some cases may require cutting of metal pieces to fit***. Compatible with most 1, 2, and 3 slot graphic cards. No bsod, rx6800 / chipset - x570, b590, or wue / whea error free. Compatible with gpu - rtx3090, rtx3070, b550, rtx3060ti, rx6900XT, rtx3080, Z590. Re-engineered wires and connectors for PCIe 4. 0 85ohm applications for GPUs, M. 2 nvme ssD. Some cases may have mis-align screw holes and may cause the gpu to be off alignment when installed, causing damage to the GPU and the system. Heavy duty bracket to vertically show off gpu and water cooler.
| Brand | LINKUP #ad |
| Manufacturer | LINKUP Technology Inc. #ad |
| Part Number | AVA-VGM-L009 |
More information #ad
2. Phanteks
#adPhanteks PH-VGPUKT_02 – Universal Vertical GPU Bracket with 220mm Flat Line Pci-E X16 Riser Cable Kit
#adMore information #ad
0/2. 0/1. 0, doesn't support PCIE 4. 0 Mudding might be required. Included 220mm riser cable. Compatible with chassis with “open” PCI slot design. Vertically display a VGA Graphics card.| Brand | Phanteks #ad |
| Manufacturer | Phanteks #ad |
| Height | 6.5 Inches |
| Length | 9.5 Inches |
| Weight | 0.95 Pounds |
| Width | 6.5 Inches |
| Part Number | PH-VGPUKT_02 |
| Model | PH-VGPUKT_02 |
| Warranty | 2 year manufacturer |
More information #ad
3. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black
#adThe 20cm/7. 8in pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance. Vertical gpu bracket with rgb led effects, g, g, b, synchronizable rgb lighting via motherboard aura, Mystic, D, R, fusion:Support M/B 3 pin RGB Header 5V, Please note : Not Support 4pin RGB header +12V, 12 volts can destroy LED.
More information #ad
With movable bracket, more flexible in using PC case interior space. Only supports PCIE 3. 0 Designed for most atx case with at least 7 PCIE slots in the market.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-3528 RGB GPU Bracket-B-with new riser |
| Model | US-3528 RGB GPU Bracket-B-with new riser |
More information #ad
4. Lian Li
#adLian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 4.0 / White -O11DMINI-1W-4
#adMore information #ad
| Brand | Lian Li #ad |
| Manufacturer | Lian Li #ad |
| Height | 15 Inches |
| Length | 8 Inches |
| Width | 7.5 Inches |
| Part Number | O11DMINI-1W-4 |
| Model | O11DMINI-1W-4 |
| Warranty | 1 year |
More information #ad
5. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket Support with Multi-Angle,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black
#adOnly support PCIE3. 0 For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling. The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud.
More information #ad
Before buying, please confirm whether there is enough space inside the chassis to install. The adjustable gpu bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | JP-Muti-VGA stand-B with new riser |
| Model | JP-Muti-VGA stand-B with new riser |
More information #ad
6. Lian Li
#adLian Li O11D-1X Vertical GPU Bracket KIT PCI-E 3.0 for O11 Dynamic Only NOT Compatible with PCI-E 4.0 VGA Card
#adMore information #ad
| Brand | Lian Li #ad |
| Manufacturer | Alian Lian 19661708715 #ad |
| Height | 14 Inches |
| Length | 1.5 Inches |
| Weight | 0.51 Pounds |
| Width | 6.9 Inches |
| Part Number | O11D-1X |
| Model | O11D-1X |
| Warranty | 1 Year |
More information #ad
7. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket,GPU Mount,Video Card VGA Support Kit with 20cm/7.8in PCIE 3.0 Riser Cable
#adBeautiful metal surface treatment, installed in the chassis to form a beautiful landscape.
More information #ad
Only supports PCIE 3. 0 Please refer to length spec image and confirm that there is enough space inside the chassis. High quality material increases structural toughness and supports the large graphics card weight on the market. Designed for most atx case with at least 7 PCIE slots in the market.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-GPU Vertical holder-B with new riser |
| Model | US-GPU Vertical holder-B with new riser |
More information #ad
8. Lian Li
#adLian Li O11DXL-1X Vertical GPU Bracket KIT PCI-E 3.0 for O11Dynamic XL NOT Compatible with PCI-E 4.0 VGA Card
#adMore information #ad
| Brand | Lian Li #ad |
| Manufacturer | LIAN LI #ad |
| Height | 7 Inches |
| Length | 8 Inches |
| Weight | 0.22 Pounds |
| Width | 6 Inches |
| Part Number | O11DXL-1X |
| Model | O11DXL-1X |
| Warranty | 1 YEAR |
More information #ad
9. IN WIN
#adInWin PCI-E Riser Cable & Socket Vertical GPU Kit
#adMore information #ad
| Brand | IN WIN #ad |
| Manufacturer | InWin #ad |
| Part Number | 2RAKIS247100 |
| Model | 2RAKIS247100 |
| Warranty | 1 year |
More information #ad
